Engine Accessory Generator
417408
(NSN) National Stock Number
2920-00-562-6149
Federal Supply Classification
2920 Nonaircraft Engine Electrical System Components
Item Name Code
17311
Schedule B Code
8511500000
Summary
Right-hand thread direction, 0.844 inches nominal thread length, 0.874 inches nominal spline major diameter, 0.216 inches minimum and 0.217 inches maximum spline width, 6 spline quantity, bracket mtd w/three mtg holes mounting style
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | XX |
Identification
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes:the major generator of "generating sets". For generators specifically designed for aircraft use and not mounted on the engine, see generator, direct current.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 17311 | A14700 | 1 | 2 |
Specifications
Thread Direction
right-hand
Details
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Thread Length
0.844 inches nominal
Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Spline Major Diameter
0.874 inches nominal
Details
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.Spline Width
0.216 inches minimum and 0.217 inches maximum
Details
None.Spline Quantity
6
Details
The number of splines on or in the item.Mounting Style
bracket mtd w/three mtg holes
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the mounting.Environmental Protection
corrosion resistant and fungus resistant
Details
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.Submersibility
nonsubmersible
Details
An indication of whether or not an item is capable of operation while submerged.Shaft Rotation Direction
clockwise
Details
The direction of rotation of a rotating shaft as viewed from the drive end.Thread Diameter
0.625 inches nominal
Details
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.Spline Length
2.000 inches nominal
Details
A measurement of the longest dimension of a spline,in distinction from width.Armature Minimum Speed In Rpm At Full Current Output
900
Details
The minimum speed the armature can revolve and maintain full current output,expressed in revolutions per minute.Maximum Output Current Rating In Amps
55.0
Details
The maximum amount of output current for which the item is rated,expressed in amperes.Minimum Current Cut-In Speed In Rpm
580
Details
The cut-in speed necessary to maintain a minimum current flow,expressed in revolutions per minute.Grounding Method
internal
Details
The means by which the item is grounded.Shaft Drive End Style
splined shaft end, threaded
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft drive end.Distance Between Shaft Center And Bottom Mounting Hole Center
4.500 inches nominal
Details
None.Distance Between Shaft Center And Top Mounting Hole Center
4.875 inches nominal
Details
None.Angular Deviation Of First Hole From Top Center In Deg
170.0
Details
None.Angular Deviation Of Second Hole From First Hole In Deg
190.0
Details
None.Distance Between Inside Surfaces Of Hinge Bracket
4.250 inches nominal
Details
None.Distance Between Outside Surfaces Of Hinge Bracket
5.370 inches minimum and 5.380 inches maximum
Details
None.Top Mounting Hole Diameter
0.531 inches nominal
Details
None.Bottom Mounting Hole Diameter
0.627 inches minimum and 0.629 inches maximum
Details
None.Maximum Rated Armature Speed In Rpm
3600
Details
The speed the armature can revolve and produce maximum current,expressed in revolutions per minute.Thread Series
unf
Details
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.Thread Class
2a
Details
A numeric-alpha designator indicating the pitch-diameter tolerance and the external or internal location of the thread.Thread Quantity Per Inch
18
Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Voltage In Volts
12.0
Details
The total electrical voltage.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1117308 | 1LW55 | 5 | - | 5 | 2 | - | ZZ |
| 1117308 | 16764 | X | - | 5 | 9 | - | XX |
| 1117308 | 24617 | X | - | 5 | 9 | - | XX |
| 1117308 | 7X677 | 5 | - | C | 1 | - | ZZ |
| 5626149 | 19207 | X | - | 5 | 2 | - | XX |
| 16WA5410 | 62265 | X | - | 5 | 2 | - | XX |
| N3574 | 56442 | 5 | - | 3 | 2 | - | AX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 590 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 2920-00-562-6149
What is the NIIN of the NSN 2920-00-562-6149?
The National Item Identification Number (NIIN) of the NSN 2920-00-562-6149 is 00-562-6149
When the NSN 2920-00-562-6149 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 2920-00-562-6149 contain any precious metals?
Type/content is unknown
Does the NSN 2920-00-562-6149 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Engine Accessory Generator
2920-00-562-6149
1117308
Engine Accessory Generator
2920-00-562-6149
1117308
Engine Accessory Generator
2920-00-562-6149
1117308
Engine Accessory Generator
2920-00-562-6149
1117308
Engine Accessory Generator
2920-00-562-6149
5626149
Engine Accessory Generator
2920-00-562-6149
16WA5410
Engine Accessory Generator
2920-00-562-6149
N3574