Film Fixed Resistor

EPW20MEG3PCT

(NSN) National Stock Number

5905-00-009-3110

Federal Supply Classification

5905 Resistor

Item Name Code

05311

Schedule B Code

8533100042

Summary

20.000 megohms electrical resistance, -2.000 to 2.000 resistance tolerance in percent, 125.0 ambient temp in deg celsius at zero percent rated power, +25.0 to 75.0 temp range of temp coefficient in deg celsius, not established reliability indicator, 0.765 inches minimum and 0.797 inches maximum terminal length

DAC	HCC	DMIL	RNCC
3	-	-	5

RNVC	SADC	MSDS	RNAAC
9	-	-	TX

Identification

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

INC	FIIG	Concept	Condition
05311	A001A0	1	1

Specifications

Electrical Resistance

20.000 megohms

Details

A measure of the opposition to the flow of electrical current.

Resistance Tolerance In Percent

-2.000 to 2.000

Details

The limits of permissible variation in the electrical resistance value of an item from its rated value,expressed in percent.

Ambient Temp In Deg Celsius At Zero Percent Rated Power

125.0

Details

The ambient temperature at which the power dissipation of an item is operated to zero percent of the full rated power,expressed in degrees celsius.

Temp Range Of Temp Coefficient In Deg Celsius

+25.0 to 75.0

Details

The maximum and minimum temperatures to which the temperature coefficient applies,expressed in degrees celsius.

Reliability Indicator

not established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Terminal Length

0.765 inches minimum and 0.797 inches maximum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Diameter

1.109 inches minimum and 1.141 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the circumference.

Body Length

6.484 inches minimum and 6.516 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Power Dissipation Rating In Watts

95.000 free air

Details

The maximum amount of electrical energy that can be expended by an item,expressed in watts.

Ambient Temp At Full Rated Power

25.0 deg celsius

Details

The temperature of the medium surrounding an item at which it can be operated continuously at full rated power.

Inclosure Type

encapsulated

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Criticality Code Justification

feat

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Terminal Type

tab, solder lug

Details

Indicates the type of terminal for providing electrical connection to the item.

Special Features

radar and iff systems

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Style Designator

radial terminal each end

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

24930-g310074 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
G310074S5	24930	A	-	3	2	-	TX
RJU-95-20MEGPORM2PCT	24546	E	-	5	9	-	TX
RPW-4-20M-1	24546	6	-	5	9	-	TX
EPW20MEG	77764	6	-	C	1	-	ZZ
EPW20MEG3PCT	14298	3	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35140	-	P	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS

CAGE: 91637

COLUMBUS , NE , 68601-3647

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5905-00-009-3110

What is the NIIN of the NSN 5905-00-009-3110?

The National Item Identification Number (NIIN) of the NSN 5905-00-009-3110 is 00-009-3110

When the NSN 5905-00-009-3110 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Sat, Jul 29, 1972

Does the NSN 5905-00-009-3110 contain any precious metals?

Does not contain precious metal

Does the NSN 5905-00-009-3110 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.