Non Wire Wound Variable Resistor
AP09-C334-1
(NSN) National Stock Number
5905-00-018-3474
Federal Supply Classification
5905 Resistor
Item Name Code
37406
Schedule B Code
8533390080
Summary
1 section quantity, cylindrical servo mounted body style, not established reliability indicator, 0.75000 inches nominal pilot diameter, 0.06200 inches nominal pilot length, 0.781 inches maximum undercut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 37406 | A002A0 | 1 | 1 |
Specifications
Section Quantity
1
Details
The number of individual elements.Body Style
cylindrical servo mounted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Pilot Diameter
0.75000 inches nominal
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.06200 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Undercut Diameter
0.781 inches maximum
Details
None.Undercut Width
0.03200 inches minimum and 0.06200 inches maximum
Details
None.Body Diameter
0.875 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.125 inches nominal
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.438 inches nominal
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Length
0.750 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Mounting Lip Diameter
0.87500 inches nominal
Details
None.Mounting Lip Depth
0.06200 inches nominal
Details
None.Shaft Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.Actuator Type
single shaft
Details
Indicates the type of facility or arrangement provided for moving the variable contact(s).Effective Electrical Rotation In Deg Angular Rotation
327.0 nominal
Details
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.Terminal Location
radially positioned over less than half the circumference
Details
The position of the terminal/s/ for making connection to an item.please use mrc cqtm in place of this discontinued mrc.Mounting Method
clamp ring
Details
The means of attaching the item.Electrical Resistance Per Section
1.0 kilohms single section
Details
A measure of the opposition to the flow of direct or alternating current per section.Rotary Actuator Travel In Angular Deg
321.0 nominal
Details
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Details
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.Power Dissipation Rating Per Section In Watts
2.0 free air single section
Details
The maximum amount of electrical energy that can be expended per section,expressed in watts.Fixed Tap Quantity Per Section
1 single section
Details
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.Tap Location Tolerance Per Section
-3.7 to 3.7 ohms single section
Details
The limits of permissible variation from the rated value of the location of a tap per section.Resistance Tolerance Per Section In Percent
-1.0 to 1.0 single section
Details
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.Actuator Travel Control Feature
stops
Details
The feature that controls the actuator travel.Tap Location From Ccw Terminal Per Section In Ohms
118.0 single section
Details
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.Ambient Temp In Deg Celsius Per Section At Full Rated Power
65.0 single section
Details
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.Terminal Type And Quantity
4 solder stud
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| PRN1151K201 | 73760 | 5 | - | C | 1 | - | ZZ |
| PRN1151K201 | 23399 | 5 | - | 5 | 9 | - | TX |
| S6190-61060-0 | 78286 | 1 | - | 3 | 2 | - | TX |
| AP09C334-1 | 02237 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 657 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
SAMARIUS PRECISION INSTRUMENTS, INC. DBA SAMARIUS PRECISION INSTRUMENTS
CAGE: 18065
WALLINGFORD
, CT
, 06492-4053
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5905-00-018-3474
What is the NIIN of the NSN 5905-00-018-3474?
The National Item Identification Number (NIIN) of the NSN 5905-00-018-3474 is 00-018-3474
When the NSN 5905-00-018-3474 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Sun, Jan 1, 1961
Does the NSN 5905-00-018-3474 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-018-3474 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products