Pre Wire Wound Variable Resistor
CP09C157
(NSN) National Stock Number
5905-00-018-9402
Federal Supply Classification
5905 Resistor
Item Name Code
37408
Schedule B Code
8533390080
Summary
1 section quantity, cylindrical servo mounted body style, not established reliability indicator, 0.7500 inches maximum pilot diameter, 0.0620 inches nominal pilot length, 1.125 inches nominal overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor(1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 37408 | A002A0 | 1 | 1 |
Specifications
Section Quantity
1
Details
The number of individual elements.Body Style
cylindrical servo mounted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Pilot Diameter
0.7500 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.0620 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Overall Length
1.125 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Undercut Diameter
0.781 inches maximum
Details
None.Undercut Width
0.0570 inches minimum
Details
None.Body Diameter
0.875 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.1249 inches maximum
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.500 inches nominal
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Length
0.625 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Overall Diameter
0.875 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Mounting Lip Diameter
0.8750 inches nominal
Details
None.Mounting Lip Depth
0.0620 inches nominal
Details
None.Shaft Style
round, slotted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.Shaft Bearing Type
sleeve
Details
Indicates the type of shaft bearing/s/ furnished.Actuator Type
single shaft
Details
Indicates the type of facility or arrangement provided for moving the variable contact(s).Effective Electrical Rotation In Deg Angular Rotation
345.0 nominal
Details
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.Maximum Starting Torque
0.75 inch-ounces
Details
The maximum amount of turning force required to initiate the actuator movement.Maximum Running Torque
0.75 inch-ounces
Details
The maximum amount of force requred to maintain actuator movement.Shaft End Play
0.004 inches
Details
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.Shaft Runout
0.002 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.Lateral Runout
0.002 inches
Details
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.Pilot Diameter Runout
0.001 inches
Details
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.Shaft Radial Play
0.002 inches
Details
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.Fragility Factor
moderately delicate
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Terminal Location
rear end
Details
The position of the terminal/s/ for making connection to an item.please use mrc cqtm in place of this discontinued mrc.Mounting Method
clamp ring
Details
The means of attaching the item.Electrical Resistance Per Section
20.0 kilohms single section
Details
A measure of the opposition to the flow of direct or alternating current per section.Rotary Actuator Travel In Angular Deg
360.0 nominal
Details
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.Function Conformity Tolerance Per Section
-0.50 to 0.50 single section
Details
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
Details
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.Power Dissipation Rating Per Section In Watts
1.25 free air single section
Details
The maximum amount of electrical energy that can be expended per section,expressed in watts.Function Conformity Per Section
single section independent linearity
Details
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section
Details
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.Actuator Travel Control Feature
continuous motion
Details
The feature that controls the actuator travel.Function Characteristic Per Section
single section linear
Details
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.Temp Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0 to 20.0 single section
Details
A constant that represents the proportionate change in resistance of the wire per section of which the resistance element of a resistor is wound,expressed in parts per million per degree celsius.Ambient Temp In Deg Celsius Per Section At Full Rated Power
40.0 single section
Details
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.Terminal Type And Quantity
3 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 60705 | 10112 | 5 | - | 3 | 2 | - | KE |
| 9429 | 04454 | 5 | - | 5 | 2 | - | TX |
| 224000 | 94117 | 1 | - | 3 | 2 | - | TX |
| 751-6579 | 12205 | 5 | - | 5 | 9 | - | TX |
| 14C1-1007 | 03111 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | B | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | 3 | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5905-00-018-9402
What is the NIIN of the NSN 5905-00-018-9402?
The National Item Identification Number (NIIN) of the NSN 5905-00-018-9402 is 00-018-9402
When the NSN 5905-00-018-9402 was assigned to the Federal Catalog?
It was assigned 57 years ago, on Sat, Apr 22, 1967
Does the NSN 5905-00-018-9402 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-018-9402 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5905-00-018-9402?
ESD sensitivity
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products