Induct Wire Wound Fixed Resistor

ARH50-2-35-1

ARH50-2-35-1
(NSN) National Stock Number
5905-00-039-7170
Federal Supply Classification
5905 Resistor
Item Name Code
37403
Schedule B Code
8533390080
Summary

-30.0 to 30.0 temp coefficient of resistance in ppm per deg celsius, 34.800 ohms electrical resistance, -1.000 to 1.000 resistance tolerance in percent, 275.0 ambient temp in deg celsius at zero percent rated power, -55.0 to 275.0 temp range of temp coefficient in deg celsius, inductive reactance characteristic

DAC HCC DMIL RNCC
5 - - E
RNVC SADC MSDS RNAAC
8 - - TX
Identification

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Exclut s suppressor, ignition interference. See also resistor (1), fixed, wire wound, noninductive.

INC FIIG Concept Condition
37403 A001A0 1 1
Specifications
Temp Coefficient Of Resistance In Ppm Per Deg Celsius
-30.0 to 30.0
Details A constant that represents the proportionate change in resistance caused by a change in temperature,expressed in parts per million change per degree celsius.
Electrical Resistance
34.800 ohms
Details A measure of the opposition to the flow of electrical current.
Resistance Tolerance In Percent
-1.000 to 1.000
Details The limits of permissible variation in the electrical resistance value of an item from its rated value,expressed in percent.
Ambient Temp In Deg Celsius At Zero Percent Rated Power
275.0
Details The ambient temperature at which the power dissipation of an item is operated to zero percent of the full rated power,expressed in degrees celsius.
Temp Range Of Temp Coefficient In Deg Celsius
-55.0 to 275.0
Details The maximum and minimum temperatures to which the temperature coefficient applies,expressed in degrees celsius.
Reactance Characteristic
inductive
Details The inductive or noninductive condition resulting from the method used in placing /winding/ wire on a form in the construction of electrical components.
Reliability Indicator
established
Details An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
Reliability Failure Rate Level In Percent
0.010
Details The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.
Terminal Length
0.376 inches minimum and 0.500 inches maximum
Details A measurement of the longest dimension of a terminal,in distinction from width.
Body Length
1.876 inches minimum and 2.000 inches maximum
Details A measurement of the longest dimension of the body,in distinction from width.
Body Width
0.532 inches minimum and 0.656 inches maximum
Details A measurement taken at right angles to the length of the body,in distinction from thickness.
Body Height
0.594 inches minimum and 0.656 inches maximum
Details A measurement from the bottom to the top of the body,in distinction from depth.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Length
1.552 inches minimum and 1.572 inches maximum
Details The distance between centerlines of mounting facilities parallel to the length of the item.
Power Dissipation Rating In Watts
10.000 free air
Details The maximum amount of electrical energy that can be expended by an item,expressed in watts.
Ambient Temp At Full Rated Power
25.0 deg celsius
Details The temperature of the medium surrounding an item at which it can be operated continuously at full rated power.
Terminal Width
0.140 inches minimum
Details A measurement taken at right angles to the length of the terminal,in distinction from thickness.
Inclosure Type
encased
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Hole Size
0.120 inches minimum and 0.130 inches maximum
Details Designates the size of the relative or proportionate dimension of the mounting hole.
Cubic Measure
0.719 cubic inches
Details A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
Terminal Type
tab, solder lug
Details Indicates the type of terminal for providing electrical connection to the item.
Unpackaged Unit Weight
32.0 grams
Details The measured weight of an item unencumbered by packaging or packing material. please use mrc ctjs in place of this discontinued mrc.
Style Designator
axial terminal (s)
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
81349-mil-r-39009 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Specification/Standard Data
81349-mil-r-39009/1 government specification
Details The document designator of the specification or standard which established the item of supply.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
2661785-4 10001 6 - C 1 - TX
1083H51 PIECE 31 04804 6 - C 1 - ZZ
RH50350HMS1PCT 91637 5 - E 8 - ZZ
3550MP35-1 00213 5 - 5 9 - TX
BACR14CH35R00CF 81205 1 - E 8 - TX
MIL-PRF-39009/1 81349 E - 4 1 - ZZ
MIL-R-39009/1 81349 E - 5 9 - TX
RER75F34R8M 81349 6 - 5 2 - 9Z
RER75F34R8R 81349 E - 2 2 - TX
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A A -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
35140 - P -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS
CAGE: 91637
COLUMBUS , NE , 68601-3647
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5905-00-039-7170
What is the NIIN of the NSN 5905-00-039-7170?
The National Item Identification Number (NIIN) of the NSN 5905-00-039-7170 is 00-039-7170
When the NSN 5905-00-039-7170 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Nov 10, 1972
Does the NSN 5905-00-039-7170 contain any precious metals?
Does not contain precious metal
Does the NSN 5905-00-039-7170 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5905-00-039-7170?
No known electrostatic discharge

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA