Pre Wire Wound Variable Resistor
55-3510
(NSN) National Stock Number
5905-00-068-0070
Federal Supply Classification
5905 Resistor
Item Name Code
37408
Schedule B Code
8533390080
Summary
1 section quantity, cylindrical servo mounted body style, not established reliability indicator, 0.7490 inches minimum and 0.7500 inches maximum pilot diameter, 0.0620 inches nominal pilot length, 1.076 inches nominal overall length
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor(1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 37408 | A002A0 | 1 | 1 |
Specifications
Section Quantity
1
Details
The number of individual elements.Body Style
cylindrical servo mounted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Reliability Indicator
not established
Details
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.Pilot Diameter
0.7490 inches minimum and 0.7500 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.0620 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Overall Length
1.076 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Undercut Diameter
0.749 inches minimum and 0.750 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Body Diameter
0.875 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.125 inches nominal
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.410 inches nominal
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Length
0.666 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Overall Diameter
1.060 inches nominal
Details
A measurement of the longest straight line across a circular cross-sectional plane.Mounting Lip Diameter
0.8750 inches nominal
Details
None.Mounting Lip Depth
0.0620 inches nominal
Details
None.Shaft Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.Actuator Type
single shaft
Details
Indicates the type of facility or arrangement provided for moving the variable contact(s).Effective Electrical Rotation In Deg Angular Rotation
320.0 nominal
Details
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.Maximum Starting Torque
0.25 inch-ounces
Details
The maximum amount of turning force required to initiate the actuator movement.Shaft End Play
0.002 inches
Details
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.Lateral Runout
0.002 inches
Details
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.Shaft Radial Play
0.001 inches
Details
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.Terminal Location
radially positioned over less than half the circumference
Details
The position of the terminal/s/ for making connection to an item.please use mrc cqtm in place of this discontinued mrc.Mounting Method
clamp ring
Details
The means of attaching the item.Electrical Resistance Per Section
100.0 kilohms single section
Details
A measure of the opposition to the flow of direct or alternating current per section.Rotary Actuator Travel In Angular Deg
360.0 nominal
Details
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.Function Conformity Tolerance Per Section
-0.50 to 0.50 single section
Details
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
Details
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.Power Dissipation Rating Per Section In Watts
2.0 free air single section
Details
The maximum amount of electrical energy that can be expended per section,expressed in watts.Function Conformity Per Section
single section terminal base linearity
Details
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.Resistance Tolerance Per Section In Percent
-5.0 to 5.0 single section
Details
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.Actuator Travel Control Feature
continuous motion
Details
The feature that controls the actuator travel.Function Characteristic Per Section
single section linear
Details
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.Ambient Temp In Deg Celsius Per Section At Full Rated Power
85.0 single section
Details
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.Test Data Document
97942-2jc3643 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Terminal Type And Quantity
3 solder stud
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1200-598 | 11534 | 3 | - | 3 | 9 | - | TX |
| 1200-598-1 | 11534 | 5 | - | 5 | 9 | - | TX |
| 2JC3643H03 | 97942 | 1 | - | 7 | 2 | - | TX |
| 751-6066 | 12205 | 5 | - | 5 | 9 | - | TX |
| 751-6066 | 19176 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | B | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | 3 | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
SAMARIUS PRECISION INSTRUMENTS, INC. DBA SAMARIUS PRECISION INSTRUMENTS
CAGE: 18065
WALLINGFORD
, CT
, 06492-4053
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5905-00-068-0070
What is the NIIN of the NSN 5905-00-068-0070?
The National Item Identification Number (NIIN) of the NSN 5905-00-068-0070 is 00-068-0070
When the NSN 5905-00-068-0070 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5905-00-068-0070 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-068-0070 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5905-00-068-0070?
ESD sensitivity
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products