Composition Fixed Resistor

M17-75155

(NSN) National Stock Number

5905-00-104-8337

Federal Supply Classification

5905 Resistor

Item Name Code

00126

Schedule B Code

8533290000

Summary

750.000 ohms electrical resistance, -5.000 to 5.000 resistance tolerance in percent, 130.0 ambient temp in deg celsius at zero percent rated power, established reliability indicator, 0.001 reliability failure rate level in percent, 1.375 inches minimum and 1.625 inches maximum terminal length

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AF	-	TX

Identification

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also attenuator,fixed; resistor,fixed,film; and resistor,thermal. Excludes:suppressor,ignition interference.

INC	FIIG	Concept	Condition
00126	A001A0	1	1

Specifications

Electrical Resistance

750.000 ohms

Details

A measure of the opposition to the flow of electrical current.

Resistance Tolerance In Percent

-5.000 to 5.000

Details

The limits of permissible variation in the electrical resistance value of an item from its rated value,expressed in percent.

Ambient Temp In Deg Celsius At Zero Percent Rated Power

130.0

Details

The ambient temperature at which the power dissipation of an item is operated to zero percent of the full rated power,expressed in degrees celsius.

Reliability Indicator

established

Details

An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.

Reliability Failure Rate Level In Percent

0.001

Details

The rate of failure determined under specified conditions to establish the reliability of an item,expressed in percent.

Terminal Length

1.375 inches minimum and 1.625 inches maximum

Details

A measurement of the longest dimension of a terminal,in distinction from width.

Body Diameter

0.115 inches minimum and 0.161 inches maximum

Details

The length of a straight line which passes through the center of the body,and terminates at the circumference.

Body Length

0.344 inches minimum and 0.416 inches maximum

Details

A measurement of the longest dimension of the body,in distinction from width.

Power Dissipation Rating In Watts

0.500 free air

Details

The maximum amount of electrical energy that can be expended by an item,expressed in watts.

Ambient Temp At Full Rated Power

70.0 deg celsius

Details

The temperature of the medium surrounding an item at which it can be operated continuously at full rated power.

Inclosure Type

encapsulated

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Terminal Type

wire lead

Details

Indicates the type of terminal for providing electrical connection to the item.

Style Designator

axial terminal each end

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-r-39008 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-r-39008/2 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
400-612-060	C3141	3	-	5	2	-	ZG
400-612-060	A1997	6	-	5	2	-	ZG
5905001959481	A00AM	9	-	6	9	-	YP
5905001959481	SCY13	9	-	5	9	-	YP
5905PL0801209	9009H	9	-	6	9	-	WP
Q317002446	S3092	1	-	E	8	-	ZG
052046-01	K1182	5	-	5	2	-	TX
M1-75155	54418	6	-	C	1	-	ZZ
311-002-046	07421	5	-	C	1	-	TX
4171306-427	05869	6	-	C	1	-	TX
001712	21793	5	-	C	1	-	TX
50-461-751	08742	5	-	C	1	-	TX
745-1347-00	13499	5	-	C	1	-	TX
745-1347-000	13499	5	-	C	1	-	TX
850380-0751	65597	5	-	C	1	-	48
137-008-7515	95542	5	-	C	1	-	TX
M1-75155	98230	6	-	C	1	-	ZZ
12CD7500	50319	5	-	C	1	-	TX
621194	11146	5	-	C	1	-	48
146494-137	00752	1	-	E	8	-	KE
560B4GF751	94033	5	-	C	1	-	TX
060-07503-042	12131	5	-	C	1	-	48
813186-46	56232	2	-	E	8	-	ZF
14000216-570	17479	5	-	C	1	-	48
35-0512	01643	6	-	C	1	-	ZZ
S280MS004P069ISSUE3	3B150	5	-	E	8	-	ZZ
418766-84	96214	5	-	C	1	-	TX
745-1347-000	95105	5	-	C	1	-	TX
280-1145P69	49956	5	-	C	1	-	TX
S280MS004P069ISSUE3	49956	5	-	5	9	-	ZZ
7902752-45	90536	6	-	C	1	-	ZZ
EB7511	01121	5	-	C	1	-	ZZ
EB7515	01121	5	-	E	8	-	KE
RCR20GF751J	01121	5	-	5	9	-	9Z
MIL-R-39008/2	81349	E	-	4	1	-	ZZ
RC20GF751J	81349	E	-	5	9	-	TX
RCR20G751J	81349	3	-	C	1	-	ZZ
RCR20G751JM	81349	3	-	5	9	-	SB
RCR20G751JP	81349	3	-	C	1	-	ZZ
RCR20G751JR	81349	3	-	5	9	-	TX
RCR20G751JS	81349	3	-	2	2	-	TX
RCR20G751K	81349	3	-	C	1	-	ZZ
RCR22G751JS	81349	3	-	C	1	-	ZZ
MS35043-84	96906	3	-	C	1	-	ZZ
RCR20G751JR	96906	6	-	C	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	A	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35140	-	P	-

RVC	WCC	TCC	SHC
-	72D	3	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MILTOPE CORPORATION

CAGE: 54418

HOPE HULL , AL , 36043-4017

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5905-00-104-8337

What is the NIIN of the NSN 5905-00-104-8337?

The National Item Identification Number (NIIN) of the NSN 5905-00-104-8337 is 00-104-8337

When the NSN 5905-00-104-8337 was assigned to the Federal Catalog?

It was assigned 56 years ago, on Fri, Jul 19, 1968

Does the NSN 5905-00-104-8337 contain any precious metals?

Type/content is unknown

Does the NSN 5905-00-104-8337 contain any hazardous material?

No data in HMIRS

What is the ESD classification of NSN 5905-00-104-8337?

No known electrostatic discharge

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.