Non Wire Wound Variable Resistor
202-107HS200
(NSN) National Stock Number
5905-00-115-8076
Federal Supply Classification
5905 Resistor
Item Name Code
37406
Schedule B Code
8533390080
Summary
1 section quantity, rectangular w/mounting holes body style, 0.390 inches minimum and 0.440 inches maximum overall length, 0.285 inches minimum and 0.315 inches maximum terminal length, 0.360 inches minimum and 0.390 inches maximum overall height, 0.430 inches minimum and 0.470 inches maximum overall width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, nonwire wound; nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 37406 | A002A0 | 1 | 1 |
Specifications
Section Quantity
1
Details
The number of individual elements.Body Style
rectangular w/mounting holes
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Overall Length
0.390 inches minimum and 0.440 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Terminal Length
0.285 inches minimum and 0.315 inches maximum
Details
A measurement of the longest dimension of a terminal,in distinction from width.Overall Height
0.360 inches minimum and 0.390 inches maximum
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
0.430 inches minimum and 0.470 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Mounting Hole Diameter
0.074 inches minimum
Details
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.Mounting Slot Width
0.074 inches minimum
Details
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.Shaft Diameter
0.030 inches minimum and 0.050 inches maximum
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.055 inches minimum and 0.065 inches maximum
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Length
0.360 inches minimum and 0.390 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Body Width
0.145 inches minimum and 0.155 inches maximum
Details
A measurement taken at right angles to the length of the body,in distinction from thickness.Body Height
0.360 inches minimum and 0.390 inches maximum
Details
A measurement from the bottom to the top of the body,in distinction from depth.Shaft Style
round, slotted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.Actuator Type
single shaft
Details
Indicates the type of facility or arrangement provided for moving the variable contact(s).Effective Electrical Rotation In Deg Angular Rotation
9000.0 nominal
Details
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.Maximum Starting Torque
5.00 inch-ounces
Details
The maximum amount of turning force required to initiate the actuator movement.Center To Center Distance Between Terminals
0.190 inches minimum and 0.210 inches maximum
Details
The center to center distance between terminals.Lateral Distance Between Mounting Hole Centers
0.414 inches minimum and 0.424 inches maximum
Details
None.Mounting Facility Quantity
3
Details
The number of mounting facilities provided.Mounting Method
unthreaded hole and slot
Details
The means of attaching the item.Center To Center Distance Between Terminal Rows
0.100 inches nominal
Details
The center to center distance between the rows of terminals.Electrical Resistance Per Section
200.000 ohms single section
Details
A measure of the opposition to the flow of direct or alternating current per section.Rotary Actuator Travel In Angular Deg
9000.0 nominal
Details
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.Center To Center Distance Between Center Terminal And Outside Terminal
0.090 inches minimum and 0.110 inches maximum
Details
The center to center distance between the center terminal and the outside terminal.Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
175.0 single section
Details
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0 to 50.0 single section
Details
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.Power Dissipation Rating Per Section In Watts
1.0 free air single section
Details
The maximum amount of electrical energy that can be expended per section,expressed in watts.Resistance Tolerance Per Section In Percent
-5.0 to 5.0 single section
Details
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.Actuator Travel Control Feature
clutch
Details
The feature that controls the actuator travel.Ambient Temp In Deg Celsius Per Section At Full Rated Power
70.0 single section
Details
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.Test Data Document
08241-gvl20404 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Terminal Type And Quantity
3 pin
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 719123-1 | 05869 | 5 | - | 5 | 2 | - | 9Z |
| 3290P1-201 | 80294 | 5 | - | 3 | 9 | - | TX |
| GVL20404-1 | 08241 | 1 | - | 5 | 9 | - | TX |
| 202-107HS200 | 0EBU2 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | A | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5905-00-115-8076
What is the NIIN of the NSN 5905-00-115-8076?
The National Item Identification Number (NIIN) of the NSN 5905-00-115-8076 is 00-115-8076
When the NSN 5905-00-115-8076 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Fri, Sep 20, 1968
Does the NSN 5905-00-115-8076 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-115-8076 contain any hazardous material?
No data in HMIRS
What is the ESD classification of NSN 5905-00-115-8076?
No known electrostatic discharge
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products