Nonwire Wound Variable Resistor
62106
(NSN) National Stock Number
5905-00-177-7342
Federal Supply Classification
5905 Resistor
Item Name Code
37405
Schedule B Code
8533400080
Summary
1 section quantity, cylindrical servo mounted body style, 1.87450 inches nominal pilot diameter, 0.06200 inches nominal pilot length, 1.582 inches maximum overall length, 1.87500 inches maximum undercut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | BD |
Identification
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 37405 | A002A0 | 1 | 1 |
Specifications
Section Quantity
1
Details
The number of individual elements.Body Style
cylindrical servo mounted
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
1.87450 inches nominal
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Pilot Length
0.06200 inches nominal
Details
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.Overall Length
1.582 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Undercut Diameter
1.87500 inches maximum
Details
None.Undercut Width
0.07300 inches minimum
Details
None.Body Diameter
1.437 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.2494 inches minimum and 0.2497 inches maximum
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.562 inches nominal
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Length
1.020 inches maximum
Details
A measurement of the longest dimension of the body,in distinction from width.Overall Diameter
2.005 inches maximum
Details
A measurement of the longest straight line across a circular cross-sectional plane.Mounting Lip Diameter
1.99750 inches nominal
Details
None.Mounting Lip Depth
0.06200 inches nominal
Details
None.Shaft Style
round
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.Actuator Type
single shaft
Details
Indicates the type of facility or arrangement provided for moving the variable contact(s).Effective Electrical Rotation In Deg Angular Rotation
357.0 minimum
Details
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.Maximum Starting Torque
2.00 inch-ounces
Details
The maximum amount of turning force required to initiate the actuator movement.Shaft Runout
0.001 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.Lateral Runout
0.002 inches
Details
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.Pilot Diameter Runout
0.00100 inches
Details
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.Shaft Radial Play
0.003 inches
Details
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.Mounting Method
clamp ring
Details
The means of attaching the item.Electrical Resistance Per Section
10.000 kilohms single section
Details
A measure of the opposition to the flow of direct or alternating current per section.Rotary Actuator Travel In Angular Deg
360.0 nominal
Details
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section
Details
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.Terminal Location
radially positioned over less than half the circumference
Details
Indicates the location of the terminal/s/ on the item.Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-400.0 to 400.0 single section
Details
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.Power Dissipation Rating Per Section In Watts
1.5 free air single section
Details
The maximum amount of electrical energy that can be expended per section,expressed in watts.Function Conformity Per Section
single section independent linearity
Details
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.Fixed Tap Quantity Per Section
1 single section
Details
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.Tap Location Tolerance Per Section
-0.5 to 0.5 ohms single section
Details
The limits of permissible variation from the rated value of the location of a tap per section.Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section
Details
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.Actuator Travel Control Feature
continuous motion
Details
The feature that controls the actuator travel.Tap Location From Ccw Terminal Per Section In Ohms
5000.0 single section
Details
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.Function Characteristic Per Section
single section linear
Details
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.Ambient Temp In Deg Celsius Per Section At Full Rated Power
80.0 single section
Details
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.Test Data Document
18876-10179966 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 10179966 | 18876 | 1 | - | 1 | 2 | - | BD |
| 200FTS146 | 08815 | 6 | - | 3 | 2 | - | BD |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35140 | - | P | P |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 658 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5905-00-177-7342
What is the NIIN of the NSN 5905-00-177-7342?
The National Item Identification Number (NIIN) of the NSN 5905-00-177-7342 is 00-177-7342
When the NSN 5905-00-177-7342 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Mon, Sep 15, 1969
Does the NSN 5905-00-177-7342 contain any precious metals?
Type/content is unknown
Does the NSN 5905-00-177-7342 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products