Rotary Switch
502-1417-000
2a single mounting facility thread class, 0.469 inches nominal single mounting facility thread length, 3.641 inches nominal overall length, 0.438 inches nominal single actuator first flat length, 0.211 inches minimum single actuator and 0.221 inches maximum single actuator flat height, 0.245 inches minimum single actuator and 0.249 inches maximum single actuator shaft diameter
DAC | HCC | DMIL | RNCC |
---|---|---|---|
6 | - | - | C |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
1 | AC | - | ZZ |
A switch actuated by a definite angular rotation of the switch shaft about its axis. It consists of a body,switch and a control,rotary switch. For items having rated actuation travel and pressure characteristics, see switch,sensitive. Excludes relay,rotary; switch,stepping; and switch,telephone (as modified).
INC | FIIG | Concept | Condition |
---|---|---|---|
02134 | A052B0 | 1 | 1 |
Details
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.Details
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
None.Details
None.Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Details
A measurement of the longest dimension of the shaft,in distinction from width.Details
A measurement of the longest straight line across a circular cross-sectional plane.Details
The number of individual sections included in the item.Details
Indicates the type of device used to prevent physical movement of the item on its mounting surface.Details
The minimum and maximum limits of temperature at which the item is rated for operation.Details
The national stock number or the identification information of the end equipment for which the item is a part.Details
The general configuration of the contacts of a switch that describes its basic switching structure.Details
The number of poles included in the item.Details
The number of positions to which the item may be actuated to energize electrical circuits.Details
The means of attaching the item.Details
The number of threads on the item per linear inch measured on a line parallel to the thread axis.Details
A designation that is used for the purpose of general identification of the thread.Details
The voltage for which the contacts are rated,expressed in volts.Details
The voltage for which the contacts are rated,expressed in volts.Details
The angular distance of the shaft flat or slot from the point of reference.Details
The number of positions to which the switch actuator may be indexed.Details
Indicates the type of shaft included on the item.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
Indicates the type of terminal for providing electrical connection to the item.Details
An indication of the switching action by the contacts of the item.Details
The increments of angular rotation that the switch actuator moves between adjacent index positions.Details
Indicates the type of device included in the switch to limit the angular rotation of its actuator.Details
The amount of current that the contacts are rated to make or break with a specified load.Details
The amount of current that the contacts are rated to make or break with a specified load.Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Details
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
5930PL0948189 | 9009H | 9 | - | 6 | 9 | - | WP |
5042-646 | 05869 | 6 | - | C | 1 | - | ZZ |
5042-647 | 05869 | 6 | - | 5 | 2 | - | 9Z |
5050-336 | 05869 | 5 | - | C | 1 | - | TX |
193-1001-000 | 21908 | 1 | - | 3 | 9 | - | TX |
32305-S | 82121 | 5 | - | C | 1 | - | TX |
32305A-S | 82121 | 3 | - | 5 | 2 | - | TX |
8918K1134 | 54294 | 5 | - | 5 | 2 | - | TX |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
P | U | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
34430 | - | M | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5930-00-007-0776?
When the NSN 5930-00-007-0776 was assigned to the Federal Catalog?
Does the NSN 5930-00-007-0776 contain any precious metals?
Does the NSN 5930-00-007-0776 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.