Dust and Moisture Seal Boot
10197289
(NSN) National Stock Number
5930-00-007-7578
Federal Supply Classification
5930 Switches
Item Name Code
19302
Schedule B Code
8538907080
Summary
2.625 inches nominal overall length, 0.843 inches nominal center to center distance between mounting facilities parallel to length, 0.875 inches nominal overall height, 1.375 inches nominal overall width, 0.050 inches nominal material thickness, 4 mounting device quantity
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 9 | - | - | 6 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | WF |
Identification
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 19302 | A02000 | - | 2 |
Specifications
Overall Length
2.625 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Center To Center Distance Between Mounting Facilities Parallel To Length
0.843 inches nominal
Details
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.Overall Height
0.875 inches nominal
Details
The distance measured in a straight line from the bottom to the top of an item.Overall Width
1.375 inches nominal
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Material Thickness
0.050 inches nominal
Details
A measurement of the smallest dimension of the material,in distinction from length or width.Mounting Device Quantity
4
Details
The number of mounting devices used as a means of attaching the item.Base Width
1.440 inches nominal
Details
A measurement taken at right angles to the length of the base,in distinction from thickness.Mounting Method
screw
Details
The means of attaching the item.Base Overall Length
1.875 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the base.First Distance From Mounting Hole Center To Base Edge
0.266 inches nominal
Details
None.Distance From Inside Opening To Base Edge
0.375 inches nominal
Details
None.Second Distance From Mounting Hole Center To Base Edge
0.281 inches nominal
Details
None.Material
rubber body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Style Designator
thru-hole
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Test Data Document
81349-mil-b-5423 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Specification/Standard Data
81349-mil-b-5423/14 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| HE-1015 | D9182 | 6 | - | C | 1 | - | ZZ |
| 110-897 | KC034 | 6 | - | 5 | 1 | - | ZZ |
| HE1015 | 97539 | 5 | - | C | 1 | - | TX |
| 260-4034-030 | 95105 | 5 | - | C | 1 | - | TX |
| M5423/14-05 | 81349 | E | - | 2 | 2 | - | TX |
| MIL-B-5423/14 | 81349 | E | - | 5 | 9 | - | TX |
| MIL-DTL-5423/14 | 81349 | E | - | 4 | 1 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| P | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 95100 | - | S | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 846 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5930-00-007-7578
What is the NIIN of the NSN 5930-00-007-7578?
The National Item Identification Number (NIIN) of the NSN 5930-00-007-7578 is 00-007-7578
When the NSN 5930-00-007-7578 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jul 12, 1972
Does the NSN 5930-00-007-7578 contain any precious metals?
Type/content is unknown
Does the NSN 5930-00-007-7578 contain any hazardous material?
No information in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
Dust and Moisture Seal Boot
5930-00-007-7578
HE-1015
Dust and Moisture Seal Boot
5930-00-007-7578
110-897
Dust and Moisture Seal Boot
5930-00-007-7578
HE1015
Dust and Moisture Seal Boot
5930-00-007-7578
260-4034-030
Dust and Moisture Seal Boot
5930-00-007-7578
M5423/14-05
Dust and Moisture Seal Boot
5930-00-007-7578
MIL-B-5423/14
Dust and Moisture Seal Boot
5930-00-007-7578
MIL-DTL-5423/14