Dust and Moisture Seal Boot

5930PL1627835

(NSN) National Stock Number

5930-00-020-7934

Federal Supply Classification

5930 Switches

Item Name Code

19302

Schedule B Code

8538907080

Summary

2b thread class, 0.062 inches nominal thread length, dustproof-nema type 13 and watertight-nema type 4 hazardous locations/environmental protection, 0.250 inches nominal overall height, 1 mounting device quantity, compression sealing method

DAC	HCC	DMIL	RNCC
9	-	-	6

RNVC	SADC	MSDS	RNAAC
9	-	-	WP

Identification

A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes:bellows, protection; grommet, nonmetallic; and cable nipple, electrical. See also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.

INC	FIIG	Concept	Condition
19302	A02000	-	2

Specifications

Thread Class

Details

A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Length

0.062 inches nominal

Details

A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

Hazardous Locations/Environmental Protection

dustproof-nema type 13 and watertight-nema type 4

Details

The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.

Overall Height

0.250 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Mounting Device Quantity

Details

The number of mounting devices used as a means of attaching the item.

Sealing Method

compression

Details

The means by which the item is sealed.

Base Height

0.088 inches nominal

Details

A measurement from the bottom to the top of a base,in distinction from depth.

Width Across Flats

0.375 inches nominal

Details

The shortest straight line between flats,perpendicular to the height.

Mounting Method

integral threaded nut

Details

The means of attaching the item.

Opening Inside Diameter

0.188 inches nominal

Details

The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.

Thread Series

uns

Details

A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.

Thread Quantity Per Inch

Details

The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size

0.250 inches

Details

A designation that is used for the purpose of general identification of the thread.

Base Thread Location

internal

Details

Indicates the location of the thread on the base.

Material

rubber silicone body

Details

The chemical compound or mechanical mixture properties of which the item is fabricated.

Material Document And Classification

mil-r-5847,type a,class 3 mil spec single material response body

Details

The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.

Style Designator

thru-hole

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Test Data Document

81349-mil-dtl-5423 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

81349-mil-dtl-5423/11 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
352250014032	H0203	3	-	5	1	-	TX
JL80725	K0119	4	-	5	9	-	ZK
19003-17	04009	3	-	C	1	-	TX
115389	16848	6	-	C	1	-	ZZ
PL1976054 IT.58	03956	6	-	C	1	-	ZZ
404-9116-001	97896	3	-	C	1	-	TX
M5423/11-01	81349	3	-	2	2	-	TX
MIL-DTL-5423/11	81349	E	-	4	1	-	ZZ
MILB5423-11	81349	3	-	5	9	-	TX
N5032B	81349	6	-	C	1	-	ZZ

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
95100	-	S	-

RVC	WCC	TCC	SHC
-	846	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX

CAGE: 9009H

NO CITY , KUJAWSKO-POMORSKIE , NO CODE

POLAND

View Products

FAQs

Frequently asked questions for NSN 5930-00-020-7934

What is the NIIN of the NSN 5930-00-020-7934?

The National Item Identification Number (NIIN) of the NSN 5930-00-020-7934 is 00-020-7934

When the NSN 5930-00-020-7934 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Sat, Apr 29, 1967

Does the NSN 5930-00-020-7934 contain any precious metals?

Does not contain precious metal

Does the NSN 5930-00-020-7934 contain any hazardous material?

No information in HMIRS

Can't Find It

Aerospace

Shop

Dust and Moisture Seal Boot

5930PL1627835

What's Included?

Can't Find It