Transmitter Synchro
BGC-8-U-7/L853
(NSN) National Stock Number
5990-00-001-7588
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.4310 inches minimum and 1.4710 inches maximum overall length, 0.7400 inches minimum and 0.7500 inches maximum flange diameter, 0.0620 inches nominal flange thickness, 0.6880 inches minimum and 0.6910 inches maximum undercut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round a
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.4310 inches minimum and 1.4710 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.7400 inches minimum and 0.7500 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.6880 inches minimum and 0.6910 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.0895 inches minimum and 0.0900 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.1410 inches minimum and 0.1710 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
8
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
100.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
540.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
54.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
12.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Rotor Dc Resistance In Ohms
37.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
10.40 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
8.500 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
30.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Pilot Length
0.0430 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Mounting Surface To Terminal End Distance
1.2900 inches maximum
Details
None.Body Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
1260.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Plus J Zso Reactance In Ohms
140.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Type
round, flatted single shaft
Details
Indicates the type of shaft included on the item.Shaft Flatted Portion Thickness
0.0130 inches minimum and 0.0170 inches maximum single shaft
Details
None.Shaft Flatted Portion Length
0.0850 inches minimum and 0.0950 inches maximum single shaft
Details
None.Terminal Type And Quantity
5 tab, solder lug
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| BGC-8-U-7/L853 | 4H618 | 5 | - | 5 | 9 | - | ZZ |
| S9302 | 12511 | 1 | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-001-7588
What is the NIIN of the NSN 5990-00-001-7588?
The National Item Identification Number (NIIN) of the NSN 5990-00-001-7588 is 00-001-7588
When the NSN 5990-00-001-7588 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, Sep 29, 1972
Does the NSN 5990-00-001-7588 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-001-7588 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products