Electrical Resolver
6139386
(NSN) National Stock Number
5990-00-003-4464
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, stainless body material, standard round c body style, 1.3120 inches nominal shoulder diameter, 0.8750 inches nominal pilot diameter, 3.1170 inches nominal overall length, 1.4370 inches nominal flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | SB |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3120 inches nominal
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8750 inches nominal
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
3.1170 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4370 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
1.3120 inches nominal
Details
None.Undercut Width
0.0780 inches nominal
Details
None.Shaft Diameter
0.1870 inches nominal rear shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Diameter
0.1873 inches nominal front shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5610 inches nominal rear shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Shaft Length
0.5710 inches nominal front shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
30.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
10.0 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Compensation Method
winding compensated
Details
The means utilized to vary the level of signal input or response to attain the desired operational action.Phase Shift Angle In Deg
5.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Interaxis Error Angular Range In Minutes
-5.0 to 5.0
Details
The deviation from 90 degrees perpendicularity of the secondary winding,when excitation is applied to one of the primary windings,expressed in minutes.Output Voltage Functional Error Range In Percent
-0.1 to 0.1
Details
The limits of permissible deviation of the actual output voltage form the theoretical sinusoidal output voltage divided by the maximum output,expressed in percent.Actuator Friction Torque At Plus 25 Deg Celsius
0.41 inch-ounces nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Pilot Length
0.0400 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1320 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.9230 inches nominal
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0300 inches nominal single shaft
Details
None.Shaft Slot Width
0.0300 inches nominal single shaft
Details
None.Shaft Type
round rear shaft
Details
Indicates the type of shaft included on the item.Shaft Type
round, slotted front shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1870 inches nominal
Details
None.Transformation Ratio
0.980 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
1.1000 inches nominal
Details
None.Terminal Type And Quantity
12 solder stud
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| VRC15-20-46 | 10651 | 4 | - | 3 | 9 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
INTERNATIONAL BUSINESS MACHINES CORP
CAGE: 20234
HUNTSVILLE
, AL
, 35807
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-003-4464
What is the NIIN of the NSN 5990-00-003-4464?
The National Item Identification Number (NIIN) of the NSN 5990-00-003-4464 is 00-003-4464
When the NSN 5990-00-003-4464 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Fri, May 26, 1972
Does the NSN 5990-00-003-4464 contain any precious metals?
Does not contain precious metal
Does the NSN 5990-00-003-4464 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products