Electrical Resolver
AY523G47A2
(NSN) National Stock Number
5990-00-007-7833
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, stainless body material, standard round c body style, 0.8118 inches minimum and 0.8123 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6540 inches nominal overall length, 0.9360 inches minimum and 0.9370 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.8118 inches minimum and 0.8123 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.6540 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.9360 inches minimum and 0.9370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0625 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.8350 inches minimum and 0.8400 inches maximum
Details
None.Undercut Width
0.0625 inches nominal
Details
None.Shaft Diameter
0.0880 inches minimum single shaft and 0.0900 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3750 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
1 rotor, 2 stator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
10
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
5.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
2.8 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
3.6 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zso Resistance In Ohms
457.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Rotor Dc Resistance In Ohms
364.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
304.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
10.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Total Null Voltage Output In Millivolts Per Volt
40.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-30.0 to 30.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
30.00 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
10.00 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Alignment Hole Quantity
3
Details
The number of holes provided for aligning the item.Shaft Radial Play Test Point
0.125 inches maximum
Details
The measurement taken from the bearing face to the point on the shaft where the weight /load/ is applied.Shaft Maximum Radial Play
0.0008 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0001 inches minimum and 0.0005 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Terminal Designator And Schematic Position
connection r1 position a and connection r2 position b and connection r3 position c and connection s1 position h and connection s2 position e and connection s3 position j and connection s4 position f
Details
A designation identifying the electrical connection facility provided for each termination of the item,and its location on the schematic diagram.Pilot Length
0.0380 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0625 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.2410 inches maximum
Details
None.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0934 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
1727.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0200 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.0781 inches nominal
Details
None.Transformation Ratio
0.767 stator to rotor nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
0.6750 inches minimum and 0.6810 inches maximum
Details
None.Shaft Radial Play Determining Weight
1.4 ounces
Details
The force (load) applied perpendicular to the shaft axis to determine radial play.Shaft End Play Determining Weight
3.0 ounces
Details
The force (load) applied parallel to the shaft axis to determine end play.Terminal Type And Quantity
7 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
CAGE: 55972
TETERBORO
, NJ
, 07608-1105
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-007-7833
What is the NIIN of the NSN 5990-00-007-7833?
The National Item Identification Number (NIIN) of the NSN 5990-00-007-7833 is 00-007-7833
When the NSN 5990-00-007-7833 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Wed, Jul 12, 1972
Does the NSN 5990-00-007-7833 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-007-7833 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.