Control Transformer Synchro
CTH8L4L787
Steel, stainless body material, standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6590 inches maximum overall length, 0.7490 inches minimum and 0.7500 inches maximum flange diameter, 0.0620 inches nominal flange thickness
DAC | HCC | DMIL | RNCC |
---|---|---|---|
5 | - | - | C |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
1 | AC | - | ZZ |
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
INC | FIIG | Concept | Condition |
---|---|---|---|
15289 | A07800 | 1 | 1 |
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Details
None.Details
None.Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Details
A measurement of the longest dimension of the shaft,in distinction from width.Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Details
An alpha and/or numeric designation indicating the size by which the body is identified.Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Details
The value of the primary /electrical/ excitation power for which the stator is rated.Details
The cycles per second /hertz/ of the alternating current.Details
The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.Details
The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.Details
The magnitude part /z/ of the stator impedance with the rotor open /zso/,expressed in ohms.Details
The angle part /o/ of the stator impedance with the rotor open /zso/,expressed in degrees.Details
The magnitude part /z/ of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Details
The angle part /o/ of the rotor impedance with the stator shorted /zrs/,expressed in degrees.Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Details
A measurement of the longest dimension of a pilot,in distinction from width.Details
None.Details
Indicates the location of the terminal/s/ on the item.Details
None.Details
None.Details
Indicates the type of shaft included on the item.Details
The ratio of the output voltage to the input voltage at maximum coupling.Details
Indicates the type and number of terminals for providing electrical connection.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
08CT-0123-C | 51761 | 6 | - | 5 | 2 | - | TX |
EAS307 | 99251 | 1 | - | 5 | 2 | - | TX |
CTH8A4/L787 | 99932 | 5 | - | 5 | 9 | - | TX |
CTH8L4L787 | 99932 | 5 | - | 3 | 2 | - | TX |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
N | U | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
34580 | - | W | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5990-00-009-3291?
When the NSN 5990-00-009-3291 was assigned to the Federal Catalog?
Does the NSN 5990-00-009-3291 contain any precious metals?
Does the NSN 5990-00-009-3291 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.