Control Transformer Synchro

CM01004900

(NSN) National Stock Number

5990-00-013-1042

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

15289

Schedule B Code

9014900000

Summary

Steel, corrosion resisting body material, standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.6160 inches nominal overall length, 0.7490 inches minimum and 0.7500 inches maximum flange diameter, 0.0620 inches nominal flange thickness

DAC	HCC	DMIL	RNCC
E	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	TX

Identification

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

INC	FIIG	Concept	Condition
15289	A07800	1	1

Specifications

Body Material

steel, corrosion resisting

Details

The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.

Body Style

standard round a

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Pilot Diameter

0.4995 inches minimum and 0.5000 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

1.6160 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

0.7490 inches minimum and 0.7500 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0620 inches nominal

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Diameter

0.6880 inches minimum and 0.6910 inches maximum

Details

None.

Undercut Width

0.0620 inches nominal

Details

None.

Shaft Diameter

0.0850 inches minimum single shaft and 0.0900 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.3770 inches nominal single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

Schematic Diagram Designator

1 y-rotor, 1 stator

Details

A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.

Fragility Factor

moderately rugged

Details

The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.

Body Size

Details

An alpha and/or numeric designation indicating the size by which the body is identified.

Stator Input Voltage Rating In Volts

11.8 nominal

Details

The value of the primary excitation voltage for which the stator is rated,expressed in volts.

Stator Input Current Rating

30.0 milliamperes nominal

Details

The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.

Stator Input Electrical Power Rating

73.0 milliwatts nominal

Details

The value of the primary /electrical/ excitation power for which the stator is rated.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Zro Resistance In Ohms

470.00 nominal

Details

The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.

Zso Resistance In Ohms

81.00 nominal

Details

The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.

Zrs Resistance In Ohms

590.00 nominal

Details

The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Rotor Dc Resistance In Ohms

365.00 nominal

Details

The opposition that the rotor offers to the flow of the direct current,expressed in ohms.

Stator Dc Resistance In Ohms

64.00 nominal

Details

The opposition that the stator offers to the flow of direct current,expressed in ohms.

Phase Shift Angle In Deg

8.500 input to output nominal

Details

The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.

Maximum Total Null Voltage Output In Millivolts Per Volt

30.00

Details

The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Electrical Error Angular Range In Minutes

-7.0 to 7.0

Details

The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.

Actuator Friction Torque At Minus 55 Deg Celsius

16.0 centimeter-grams nominal

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.

Actuator Friction Torque At Plus 25 Deg Celsius

4.0 centimeter-grams nominal

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.

Shaft Radial Play Test Point

0.125 inches maximum

Details

The measurement taken from the bearing face to the point on the shaft where the weight /load/ is applied.

Shaft Maximum Radial Play

0.0005 inches

Details

The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.

Shaft End Play

0.0003 inches minimum and 0.0008 inches maximum

Details

The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.

Pilot Length

0.0430 inches nominal

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Mounting Surface To Terminal End Distance

1.2410 inches maximum

Details

None.

Shaft Maximum Runout

0.0010 inches

Details

The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Plus J Zro Reactance In Ohms

1770.00 nominal

Details

The reactance (x) part of the rotor impedance with the stator open (zro).

Shaft Slot Depth

0.0250 inches nominal single shaft

Details

None.

Plus J Zso Reactance In Ohms

330.00 nominal

Details

The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.

Shaft Slot Width

0.0200 inches nominal single shaft

Details

None.

Plus J Zrs Reactance In Ohms

190.00 nominal

Details

The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Shaft Radial Play Determining Weight

4.0 ounces

Details

The force (load) applied perpendicular to the shaft axis to determine radial play.

Shaft End Play Determining Weight

8.0 ounces

Details

The force (load) applied parallel to the shaft axis to determine end play.

Terminal Type And Quantity

5 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
10392443	18876	A	-	5	2	-	TX
1783847-2	07187	A	-	7	2	-	TX
08CT-0123-B	51761	5	-	5	2	-	TX
3563080-0170	96774	5	-	5	9	-	ZZ
08CT1412	14404	5	-	5	2	-	ZZ
CM01004900	05088	5	-	5	2	-	ZZ
CMO1002900	05088	5	-	5	9	-	ZZ
CTH-8-A-4/A013	4H618	5	-	5	9	-	ZZ
4277-01	58880	5	-	5	9	-	TX
T4277-01	58880	A	-	5	9	-	TX
CM01002900	88818	E	-	5	9	-	TX
3563080-0170	55972	5	-	5	9	-	TX
1783847-2	99932	5	-	5	9	-	TX
4277-01	99932	5	-	5	9	-	TX
CTH-8-A-4/A013	99932	5	-	5	2	-	TX
T4277-01	99932	5	-	5	9	-	TX
10122-2	10138	A	-	3	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34580	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION

CAGE: 88818

PINE BROOK , NJ , 07058-9385

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5990-00-013-1042

What is the NIIN of the NSN 5990-00-013-1042?

The National Item Identification Number (NIIN) of the NSN 5990-00-013-1042 is 00-013-1042

When the NSN 5990-00-013-1042 was assigned to the Federal Catalog?

It was assigned 57 years ago, on Tue, Apr 25, 1967

Does the NSN 5990-00-013-1042 contain any precious metals?

Type/content is unknown

Does the NSN 5990-00-013-1042 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.