Transmitter Synchro
617461
(NSN) National Stock Number
5990-00-018-8604
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round c body style, 1.0000 inches maximum shoulder diameter, 0.6250 inches maximum pilot diameter, 2.2170 inches maximum overall length, 1.0620 inches maximum flange diameter, 0.0930 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.2170 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0620 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9750 inches nominal
Details
None.Undercut Width
0.0620 inches minimum
Details
None.Shaft Diameter
0.1873 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5000 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
1 y-rotor, 1 stator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
173.0 milliamperes maximum
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
800.0 milliwatts maximum
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
29.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zrs Resistance In Ohms
43.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Zss Resistance In Ohms
6.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor shorted /zss/,expressed in ohms.Rotor Dc Resistance In Ohms
19.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
6.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Electrical Error Angular Range In Minutes
-10.0 to 10.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
15.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Torque Gradient Per Angular Deg
3500.0 millimeter-milligrams minimum
Details
The average torque per angular degree developed between two like items,when one rotor is turned /or displaced/ at 2 degree intervals,between a 10 degree counterclockwise position and 10 degree clockwise position.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Shaft Maximum Radial Play
0.0008 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0010 inches nominal
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.6400 inches maximum
Details
None.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Body Material
aluminum alloy
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
163.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0310 inches nominal single shaft
Details
None.Shaft Slot Width
0.0310 inches nominal single shaft
Details
None.Plus J Zrs Reactance In Ohms
15.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.0500 inches maximum
Details
None.Plus J Zss Reactance In Ohms
27.00 nominal
Details
The reactance /x/ part of the stator impedance with the rotor shorted /zss/,expressed in ohms.Transformation Ratio
0.454 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
0.8120 inches minimum
Details
None.Shaft Radial Play Determining Weight
4.0 ounces
Details
The force (load) applied perpendicular to the shaft axis to determine radial play.Shaft End Play Determining Weight
4.0 ounces
Details
The force (load) applied parallel to the shaft axis to determine end play.Special Features
shaft radial play test point 0.125 inches nom.
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| SMC617461 | 36180 | 5 | - | C | 1 | - | ZZ |
| SM-C-617461 | 80063 | 1 | - | 3 | 2 | - | TX |
| U-214778 | 82686 | 5 | - | 5 | 2 | - | TX |
| 11TX-300-N-22A/10 | 06989 | 5 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
ULTRA ELECTRONICS MARITIME SYSTEMS INC DIV SUBSIDIARY OF ULTRA ELECTRONICS HOLDINGS LIMITED
CAGE: 36180
DARTMOUTH
, NS
, B2Y 4N2
CANADA
View Products
FAQs
Frequently asked questions for NSN 5990-00-018-8604
What is the NIIN of the NSN 5990-00-018-8604?
The National Item Identification Number (NIIN) of the NSN 5990-00-018-8604 is 00-018-8604
When the NSN 5990-00-018-8604 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, May 15, 1968
Does the NSN 5990-00-018-8604 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-018-8604 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products