Electrical Resolver
VRN11-1000A5
(NSN) National Stock Number
5990-00-057-0629
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round c body style, 1.0000 inches nominal shoulder diameter, 0.6250 inches nominal pilot diameter, 2.5620 inches nominal overall length, 1.0620 inches nominal flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.0000 inches nominal
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6250 inches nominal
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.5620 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0620 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0900 inches minimum and 0.0960 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9720 inches minimum and 0.9780 inches maximum
Details
None.Undercut Width
0.0450 inches minimum and 0.0550 inches maximum
Details
None.Shaft Diameter
0.1200 inches nominal single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3120 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
3.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
40.0 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Rotor Input Voltage Rating In Volts
50.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
5000.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zso Resistance In Ohms
14.50 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Maximum Total Null Voltage Output In Millivolts Per Volt
1.50
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Pilot Length
0.0370 inches minimum and 0.0650 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0590 inches minimum and 0.0650 inches maximum
Details
None.Mounting Surface To Terminal End Distance
2.2500 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zso Reactance In Ohms
75.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Type
round single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.610 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
8 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 335789 | 56232 | X | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-057-0629
What is the NIIN of the NSN 5990-00-057-0629?
The National Item Identification Number (NIIN) of the NSN 5990-00-057-0629 is 00-057-0629
When the NSN 5990-00-057-0629 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Sun, Jan 1, 1961
Does the NSN 5990-00-057-0629 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-057-0629 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products