Control Transformer Synchro
5RS900-2A
(NSN) National Stock Number
5990-00-060-2082
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
15289
Schedule B Code
9014900000
Summary
Steel, stainless body material, standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.1290 inches minimum and 2.1530 inches maximum overall length, 1.0570 inches minimum and 1.0650 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15289 | A07800 | 1 | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.1290 inches minimum and 2.1530 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0570 inches minimum and 1.0650 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0900 inches minimum and 0.0960 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9700 inches minimum and 0.9800 inches maximum
Details
None.Undercut Width
0.0450 inches minimum and 0.0550 inches maximum
Details
None.Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3670 inches minimum single shaft and 0.3850 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Maximum Temp Rise
2.0 deg celsius
Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
90.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
20.0 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
180.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Resistance In Ohms
625.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
875.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
625.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Zro Impedance Magnitude In Ohms
3340.00 nominal
Details
The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.Zro Impedance Angle In Deg
79.20 nominal
Details
The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.Zso Impedance Magnitude In Ohms
5470.00 nominal
Details
The magnitude part /z/ of the stator impedance with the rotor open /zso/,expressed in ohms.Zso Impedance Angle In Deg
80.80 nominal
Details
The angle part /o/ of the stator impedance with the rotor open /zso/,expressed in degrees.Zrs Impedance Magnitude In Ohms
718.00 nominal
Details
The magnitude part /z/ of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Zrs Impedance Angle In Deg
29.50 nominal
Details
The angle part /o/ of the rotor impedance with the stator shorted /zrs/,expressed in degrees.Rotor Dc Resistance In Ohms
327.25 minimum and 442.75 maximum
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
471.75 minimum and 638.25 maximum
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
4.500 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
59.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
94.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Pilot Length
0.0590 inches minimum and 0.0650 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0590 inches minimum and 0.0650 inches maximum
Details
None.Mounting Surface To Terminal End Distance
1.7620 inches minimum and 1.7680 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
3280.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0350 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
5400.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0250 inches nominal single shaft
Details
None.Plus J Zrs Reactance In Ohms
352.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.706 rotor to stator minimum and 0.764 rotor to stator maximum
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
5 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 900141-34 | 06481 | X | - | 3 | 2 | - | XX |
| 5RS900-2A | 88818 | 5 | - | 5 | 9 | - | KE |
| 11CT200C2-5 | 06989 | 5 | - | 5 | 2 | - | KE |
| BCT11E8A201 | 99932 | 5 | - | 5 | 9 | - | KE |
| BTC-11-E-8/B386 | 99932 | 1 | - | 5 | 2 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
KEARFOTT CORP DIV A SUBSIDIARY OF ASTRONAUTICS CORPORATION OF AMERICA
CAGE: 05088
BLACK MOUNTAIN
, NC
, 28711-9111
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-060-2082
What is the NIIN of the NSN 5990-00-060-2082?
The National Item Identification Number (NIIN) of the NSN 5990-00-060-2082 is 00-060-2082
When the NSN 5990-00-060-2082 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-060-2082 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-060-2082 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products