Transmitter Synchro
HGC-8-A-002
(NSN) National Stock Number
5990-00-061-3360
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.5750 inches nominal overall length, 0.7450 inches minimum and 0.7500 inches maximum flange diameter, 0.0620 inches nominal flange thickness, 0.6880 inches minimum and 0.6910 inches maximum undercut diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round a
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.5750 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.7450 inches minimum and 0.7500 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.6880 inches minimum and 0.6910 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.0895 inches minimum and 0.0900 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3750 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
8
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
120.0 milliamperes maximum
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
600.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
39.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
11.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
76.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Rotor Dc Resistance In Ohms
29.40 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
11.50 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
7.500 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Torque Gradient Per Angular Deg
2000.0 millimeter-milligrams nominal
Details
The average torque per angular degree developed between two like items,when one rotor is turned /or displaced/ at 2 degree intervals,between a 10 degree counterclockwise position and 10 degree clockwise position.Pilot Length
0.0400 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Mounting Surface To Terminal End Distance
1.2400 inches maximum
Details
None.Body Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
225.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0260 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
39.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0250 inches nominal single shaft
Details
None.Plus J Zrs Reactance In Ohms
24.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 11030567-1 | 18876 | 6 | - | 5 | 2 | - | TX |
| C2035 | 13094 | 6 | - | 5 | 9 | - | TX |
| 4273-01 | 99932 | 6 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-061-3360
What is the NIIN of the NSN 5990-00-061-3360?
The National Item Identification Number (NIIN) of the NSN 5990-00-061-3360 is 00-061-3360
When the NSN 5990-00-061-3360 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-061-3360 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-061-3360 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products