Control Transformer Synchro
09CT1247
(NSN) National Stock Number
5990-00-072-5450
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
15289
Schedule B Code
9014900000
Summary
Steel, corrosion resisting body material, standard round, rotatable stator c body style, 0.6950 inches minimum and 0.7050 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 3.1830 inches maximum overall length, 0.9100 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15289 | A07800 | 1 | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round, rotatable stator c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.6950 inches minimum and 0.7050 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
3.1830 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.9100 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0570 inches minimum and 0.0670 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.7360 inches minimum and 0.7460 inches maximum
Details
None.Undercut Width
0.0570 inches minimum
Details
None.Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.7030 inches minimum single shaft and 0.7330 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
1 y-rotor, 1 stator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Maximum Temp Rise
5.0 deg celsius
Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Body Size
10
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
11.8 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
40.0 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
100.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Resistance In Ohms
446.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
79.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
548.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Rotor Dc Resistance In Ohms
316.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
67.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
6.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
30.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
60.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
20.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
30.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Shaft Maximum Radial Play
0.0010 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0020 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Pilot Length
0.0380 inches minimum and 0.0480 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0570 inches minimum and 0.0670 inches maximum
Details
None.Mounting Surface To Terminal End Distance
2.0000 inches maximum
Details
None.Shaft Maximum Runout
0.0020 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
1887.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Plus J Zso Reactance In Ohms
350.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Plus J Zrs Reactance In Ohms
182.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
2.159 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Shaft Radial Play Determining Weight
4.0 ounces
Details
The force (load) applied perpendicular to the shaft axis to determine radial play.Shaft End Play Determining Weight
8.0 ounces
Details
The force (load) applied parallel to the shaft axis to determine end play.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 5990PL0192269 | 9009H | 9 | - | 6 | 9 | - | WP |
| 137640-01 | 35351 | A | - | 3 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.
CAGE: 14404
NEW ULM
, MN
, 56073-1167
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-072-5450
What is the NIIN of the NSN 5990-00-072-5450?
The National Item Identification Number (NIIN) of the NSN 5990-00-072-5450 is 00-072-5450
When the NSN 5990-00-072-5450 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-072-5450 contain any precious metals?
Does not contain precious metal
Does the NSN 5990-00-072-5450 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products