Electrical Resolver
11-4111-03
(NSN) National Stock Number
5990-00-072-9408
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round b body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.3220 inches minimum and 2.3270 inches maximum overall length, 1.0580 inches minimum and 1.0650 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round b
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.3220 inches minimum and 2.3270 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0580 inches minimum and 1.0650 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Width
0.0500 inches nominal
Details
None.Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.6140 inches minimum single shaft and 0.6380 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Maximum Temp Rise
2.5 deg celsius
Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
52.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
340.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Impedance Magnitude In Ohms
550.00 nominal
Details
The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.Zro Impedance Angle In Deg
78.10 nominal
Details
The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.Rotor Dc Resistance In Ohms
75.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
15.50 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Transformation Ratio Equality In Percent
0.4 nominal
Details
The variation of the transformation ratio for all possible combinations of stator,rotor,and compensating windings,expressed in percent.Phase Shift Angle In Deg
8.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
18.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
30.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Actuator Friction Torque At Minus 55 Deg Celsius
16.00 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
4.00 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.6980 inches minimum and 1.7030 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0300 inches nominal single shaft
Details
None.Shaft Slot Width
0.0250 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.484 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
7 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 330C784 | 95036 | 1 | - | 5 | 9 | - | CL |
| 229-0143-00 | 13499 | X | - | 3 | 9 | - | XX |
| RS931-2E | 05088 | 5 | - | 5 | 2 | - | TX |
| RS931-2E | 88818 | 5 | - | 5 | 9 | - | CL |
| 21302260 | 72314 | X | - | 5 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-072-9408
What is the NIIN of the NSN 5990-00-072-9408?
The National Item Identification Number (NIIN) of the NSN 5990-00-072-9408 is 00-072-9408
When the NSN 5990-00-072-9408 was assigned to the Federal Catalog?
It was assigned 61 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-072-9408 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-072-9408 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products