Control Transformer Synchro
11-GLT-25RHX/B852
(NSN) National Stock Number
5990-00-101-2524
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
15289
Schedule B Code
9014900000
Summary
Steel, stainless body material, standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.1660 inches minimum and 2.1860 inches maximum overall length, 1.0570 inches minimum and 1.0650 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15289 | A07800 | 1 | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.1660 inches minimum and 2.1860 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0570 inches minimum and 1.0650 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0900 inches minimum and 0.0960 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9700 inches minimum and 0.9800 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.1870 inches minimum single shaft and 0.1873 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5340 inches minimum single shaft and 0.5600 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
11.8 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Impedance Magnitude In Ohms
3160.00 minimum and 3740.00 maximum
Details
The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.Zro Impedance Angle In Deg
78.00 minimum and 84.00 maximum
Details
The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.Zso Impedance Magnitude In Ohms
594.00 minimum and 736.00 maximum
Details
The magnitude part /z/ of the stator impedance with the rotor open /zso/,expressed in ohms.Zso Impedance Angle In Deg
79.00 minimum and 85.00 maximum
Details
The angle part /o/ of the stator impedance with the rotor open /zso/,expressed in degrees.Rotor Dc Resistance In Ohms
415.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
64.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
4.800 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
25.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
35.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-5.5 to 5.5
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Pilot Length
0.0590 inches minimum and 0.0650 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0590 inches minimum and 0.0650 inches maximum
Details
None.Mounting Surface To Terminal End Distance
1.6910 inches maximum
Details
None.Terminal Location
side
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0260 inches minimum single shaft and 0.0360 inches maximum single shaft
Details
None.Shaft Slot Width
0.0260 inches minimum single shaft and 0.0360 inches maximum single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
1.560 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 11GLT25RHXB852 | 99971 | 1 | - | 5 | 9 | - | TX |
| 7537281P0001 | 99971 | 5 | - | 3 | 9 | - | ZZ |
| 7537281P1 | 99971 | A | - | 5 | 9 | - | TX |
| 11GLT25RHX/BB2 | 99932 | 6 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-101-2524
What is the NIIN of the NSN 5990-00-101-2524?
The National Item Identification Number (NIIN) of the NSN 5990-00-101-2524 is 00-101-2524
When the NSN 5990-00-101-2524 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Sun, Dec 17, 1972
Does the NSN 5990-00-101-2524 contain any precious metals?
Does not contain precious metal
Does the NSN 5990-00-101-2524 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products