Receiver Synchro
M20708/500-001
Standard round c body style, 0.8118 inches minimum and 0.8123 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.5460 inches minimum and 1.5760 inches maximum overall length, 0.9360 inches minimum and 0.9380 inches maximum flange diameter, 0.0620 inches nominal flange thickness
DAC | HCC | DMIL | RNCC |
---|---|---|---|
5 | - | - | C |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
1 | AF | - | TX |
A synchro consisting of a stator and rotor inductively coupled. The rotor is free to turn in accordance with the electrical input from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, variable transformers, or items with dials.
INC | FIIG | Concept | Condition |
---|---|---|---|
02072 | A07800 | 1 | 1 |
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Details
None.Details
None.Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Details
A measurement of the longest dimension of the shaft,in distinction from width.Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Details
The maximum permissible temperature increase in the item as a result of its operation under normal conditions.Details
An alpha and/or numeric designation indicating the size by which the body is identified.Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Details
The cycles per second /hertz/ of the alternating current.Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Details
The magnitude part /z/ of the stator impedance with the rotor shorted /zss/,expressed in ohms.Details
The angle part /o/ of the stator impedance with the rotor shorted /zss/,expressed in degrees.Details
The magnitude part /z/ of the stator impedance with the rotor open and displaced 90 degrees from zero /zs0-90/,expressed in ohms.Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Details
The limits of permissible deviation between the position transmitted and the position assumed when the receiver is connected to a transmitter of equal size,expressed in minutes.Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Details
The number of holes provided for aligning the item.Details
A measurement of the longest dimension of a pilot,in distinction from width.Details
None.Details
None.Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Details
Indicates the location of the terminal/s/ on the item.Details
None.Details
None.Details
Indicates the type of shaft included on the item.Details
None.Details
The ratio of the output voltage to the input voltage at maximum coupling.Details
None.Details
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.Details
Indicates the type and number of terminals for providing electrical connection.Details
The document designator of the specification or standard which established the item of supply.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
M20708/500-001 | 0U583 | E | - | 3 | 2 | - | ZZ |
SAE-AS20708/500 | 0U583 | E | - | 3 | 1 | - | ZZ |
10TR4 | 81349 | E | - | 5 | 1 | - | TX |
M20708/500-001 | 81349 | 3 | - | 5 | 9 | - | TX |
MIL-S-20708/500 | 81349 | E | - | 5 | 9 | - | TX |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
N | U | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
34580 | - | W | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 657 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
What is the NIIN of the NSN 5990-00-110-9441?
When the NSN 5990-00-110-9441 was assigned to the Federal Catalog?
Does the NSN 5990-00-110-9441 contain any precious metals?
Does the NSN 5990-00-110-9441 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.