Linear Electrical Resolver
800292
(NSN) National Stock Number
5990-00-120-1191
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
31780
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round a body style, 0.6875 inches maximum pilot diameter, 3.6430 inches maximum overall length, 0.9370 inches nominal flange diameter, 0.0620 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | TX |
Identification
An item consisting of a stator and rotor inductively coupled which provides accurate linear indication of shaft rotation about a reference position in the form of a polarized voltage whose magnitude is proportional to angular displacement and phase relationship indicates direction of shaft rotation. Its windings and slots are not uniformly distributed, but instead are deliberately modified to produce a linear output which is usually limited to less than plus or minus 90 degrees of effective electrical travel. Normally it has only one energization winding and one output winding. See also resolver, electrical.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 31780 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round a
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
0.6875 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
3.6430 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.9370 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.8370 inches nominal
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.1248 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.6810 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
1 rotor, 1 stator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
10
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Phase Shift Angle In Deg
5.000 input to output minimum
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Linear Range In Deg
-60.0 to 60.0
Details
The rated excursion of angular measurement of that part of total rotational travel in which the output characteristic changes at a rate in direct proportion to the angular primary to secondary orientation changes,expressed in degrees.Linearity In Percent
1.00
Details
The variance,in the specified output characteristics from the theoretically percise values,throughout the linear operational range,expressed as a percentage of deviation from the straight line rate of change.Shaft End Play
0.0020 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Pilot Length
0.0380 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Mounting Surface To Terminal End Distance
2.9040 inches maximum
Details
None.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Terminal Location
rear and side
Details
Indicates the location of the terminal/s/ on the item.Shaft Type
round single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.923 stator to rotor minimum
Details
The ratio of the output voltage to the input voltage at maximum coupling.Special Features
magnetic clutch
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Terminal Type And Quantity
6 turret
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 7901415 | 93322 | A | - | 5 | 2 | - | TX |
| 800292-1 | 1W820 | 5 | - | 3 | 2 | - | TX |
| 101P304-D27A | 06989 | 6 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-120-1191
What is the NIIN of the NSN 5990-00-120-1191?
The National Item Identification Number (NIIN) of the NSN 5990-00-120-1191 is 00-120-1191
When the NSN 5990-00-120-1191 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Mon, Oct 21, 1968
Does the NSN 5990-00-120-1191 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-120-1191 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products