Electrical Resolver
RS15-10A2
(NSN) National Stock Number
5990-00-127-6749
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round b body style, 1.3120 inches maximum shoulder diameter, 0.8500 inches maximum pilot diameter, 2.7110 inches maximum overall length, 1.4370 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round b
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3120 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8500 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.7110 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Width
0.0780 inches nominal
Details
None.Shaft Diameter
0.1872 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5000 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
2 rotor, 1 stator, 1 compensator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
30.0 maximum
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
135.0 milliamperes maximum
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
700.0 milliwatts maximum
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
1000.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Impedance Magnitude In Ohms
200.00 nominal
Details
The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.Zro Impedance Angle In Deg
81.00 nominal
Details
The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.Rotor Dc Resistance In Ohms
12.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
16.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Compensation Method
winding compensated
Details
The means utilized to vary the level of signal input or response to attain the desired operational action.Compensator Dc Resistance In Ohms
32.00 nominal
Details
The opposition that the compensator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
4.200 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
20.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
30.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Interaxis Error Angular Range In Minutes
-5.0 to 5.0
Details
The deviation from 90 degrees perpendicularity of the secondary winding,when excitation is applied to one of the primary windings,expressed in minutes.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Spline Tooth Quantity
21 single shaft
Details
The number of individual teeth on the splined portion of the shaft.Actuator Friction Torque At Plus 25 Deg Celsius
4.0 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Shaft Maximum Radial Play
0.0008 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0005 inches minimum and 0.0015 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Terminal Designator And Schematic Position
connection r1 position c and connection r2 position j and connection r3 position d and connection r4 position g and connection s1 position a and connection s3 position b and connection c1 position k and connection c2 position l
Details
A designation identifying the electrical connection facility provided for each termination of the item,and its location on the schematic diagram.Pilot Length
0.0400 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1320 inches nominal
Details
None.Mounting Surface To Terminal End Distance
2.0510 inches maximum
Details
None.Spline Tooth Diametral Pitch
175 single shaft
Details
The number of teeth the splined shaft has per inch of pitch diameter.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.2000 inches minimum single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
spline w/threads single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1870 inches maximum
Details
None.Transformation Ratio
1.000 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
1.1000 inches nominal
Details
None.Shaft Nominal Thread Size
0.185 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Terminal Type And Quantity
12 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 401080 | 20284 | 1 | - | 7 | 2 | - | KE |
| 401080 | 12909 | 1 | - | 5 | 9 | - | KE |
| VRG15120-10A | 10651 | 5 | - | 5 | 9 | - | KE |
| VRS15-10A2 | 10651 | 6 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-127-6749
What is the NIIN of the NSN 5990-00-127-6749?
The National Item Identification Number (NIIN) of the NSN 5990-00-127-6749 is 00-127-6749
When the NSN 5990-00-127-6749 was assigned to the Federal Catalog?
It was assigned 56 years ago, on Wed, Nov 27, 1968
Does the NSN 5990-00-127-6749 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-127-6749 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products