Electrical Transolver
CM41005018
(NSN) National Stock Number
5990-00-136-0991
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
33272
Schedule B Code
8807300060
Summary
Steel, stainless body material, standard round a body style, 0.5000 inches nominal pilot diameter, 1.6340 inches maximum overall length, 0.7500 inches nominal flange diameter, 0.0620 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It has wye connected and quadrature windings, either of which can be stator or the rotor and serve as the primary for input voltages. The output voltages are trigonometric functions of the input voltages and the angular displacement of the rotor with respect to the stator. See also synchro (as modified). Excludes:resolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 33272 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round a
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
0.5000 inches nominal
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.6340 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.7500 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.6910 inches nominal
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.0900 inches nominal single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3320 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
8
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Resistance In Ohms
936.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
120.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Rotor Dc Resistance In Ohms
725.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
100.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Maximum Total Null Voltage Output In Millivolts Per Volt
40.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-14.0 to 14.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Pilot Length
0.0430 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Mounting Surface To Terminal End Distance
1.2410 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
2600.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0300 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
450.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0250 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Terminal Type And Quantity
6 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 229-6026-010 | 13499 | 1 | - | 5 | 9 | - | TX |
| 229-6026-020 | 13499 | 1 | - | 3 | 2 | - | TX |
| CSDH-8-A-2/L606 | 4H618 | 5 | - | 5 | 2 | - | ZZ |
| CSDH8A2L606 | 99932 | 5 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
KEARFOTT CORP DIV A SUBSIDIARY OF ASTRONAUTICS CORPORATION OF AMERICA
CAGE: 05088
BLACK MOUNTAIN
, NC
, 28711-9111
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-136-0991
What is the NIIN of the NSN 5990-00-136-0991?
The National Item Identification Number (NIIN) of the NSN 5990-00-136-0991 is 00-136-0991
When the NSN 5990-00-136-0991 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Fri, Jan 10, 1969
Does the NSN 5990-00-136-0991 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-136-0991 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products