Control Transformer Synchro
63111002
(NSN) National Stock Number
5990-00-147-3144
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
15289
Schedule B Code
9014900000
Summary
Steel, corrosion resisting body material, standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.4050 inches maximum overall length, 0.7490 inches minimum and 0.7500 inches maximum flange diameter, 0.0620 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 9 | - | - | KE |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 15289 | A07800 | 1 | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round a
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.4050 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
0.7490 inches minimum and 0.7500 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0620 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.6880 inches minimum and 0.6910 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.8950 inches nominal single shaft and 0.9000 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3170 inches nominal single shaft and 0.3470 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
8
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
11.8 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
11.3 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
29.5 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zso Resistance In Ohms
230.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Stator Dc Resistance In Ohms
200.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
9.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
9.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Pilot Length
0.0430 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Mounting Surface To Terminal End Distance
1.0150 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0250 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
870.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0200 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.524 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 63111002 | 1K426 | 1 | - | 7 | 9 | - | KE |
| 080T2282AR | 99932 | 5 | - | 3 | 2 | - | KE |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-147-3144
What is the NIIN of the NSN 5990-00-147-3144?
The National Item Identification Number (NIIN) of the NSN 5990-00-147-3144 is 00-147-3144
When the NSN 5990-00-147-3144 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, Sep 17, 1971
Does the NSN 5990-00-147-3144 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-147-3144 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products