Electrical Resolver
R105
(NSN) National Stock Number
5990-00-158-5392
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, stainless body material, standard round b body style, 1.3115 inches minimum and 1.3120 inches maximum shoulder diameter, 0.8745 inches minimum and 0.8750 inches maximum pilot diameter, 2.4790 inches maximum overall length, 1.4360 inches minimum and 1.4370 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round b
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3115 inches minimum and 1.3120 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8745 inches minimum and 0.8750 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.4790 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4360 inches minimum and 1.4370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Width
0.0780 inches nominal
Details
None.Shaft Diameter
0.1871 inches minimum single shaft and 0.1873 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.4150 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
60.0 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
120.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Zro Resistance In Ohms
320.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Rotor Dc Resistance In Ohms
80.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
40.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Compensator Transformation Ratio In Percent
0.985 rotor to compensator nominal
Details
The ratio of the fundamental component of the no-load secondary voltage to the compensator voltage at maximum coupling,expressed in percent.Phase Shift Angle In Deg
6.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Electrical Error Angular Range In Minutes
-3.5 to 3.5
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Pilot Length
0.0400 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1320 inches nominal
Details
None.Mounting Surface To Terminal End Distance
2.0640 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
880.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0300 inches nominal single shaft
Details
None.Shaft Slot Width
0.0300 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1250 inches nominal
Details
None.Transformation Ratio
6.000 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
1.0970 inches nominal
Details
None.Terminal Type And Quantity
12 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 71010348-002 | 89944 | 1 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
COMPUTER CONVERSIONS CORPORATION DBA COMPUTER CONVERSIONS CORP
CAGE: 51086
EAST NORTHPORT
, NY
, 11731-1704
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-158-5392
What is the NIIN of the NSN 5990-00-158-5392?
The National Item Identification Number (NIIN) of the NSN 5990-00-158-5392 is 00-158-5392
When the NSN 5990-00-158-5392 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Fri, Jan 26, 1973
Does the NSN 5990-00-158-5392 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-158-5392 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products