Electrical Resolver
140-018-0001
(NSN) National Stock Number
5990-00-164-5992
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Standard round b body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 3.1300 inches nominal overall length, 1.0620 inches nominal flange diameter, 0.0930 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 1 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KE |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Style
standard round b
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
3.1300 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0620 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Width
0.0500 inches nominal
Details
None.Shaft Diameter
0.1195 inches minimum and 0.1200 inches maximum rear shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Diameter
0.1244 inches minimum and 0.1249 inches maximum front shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5680 inches nominal rear shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Shaft Length
0.6850 inches nominal front shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
10
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
7.0 minimum and 7.1 maximum
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
2.0 milliamperes maximum
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
6.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Frequency In Hertz
4560.0 minimum and 5040.0 maximum
Details
The cycles per second /hertz/ of the alternating current.Zro Resistance In Ohms
1200.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
1200.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
120.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Zss Resistance In Ohms
120.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor shorted /zss/,expressed in ohms.Rotor Dc Resistance In Ohms
75.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
30.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
2.000 input to output maximum
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
7.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Interaxis Error Angular Range In Minutes
-7.0 to 7.0
Details
The deviation from 90 degrees perpendicularity of the secondary winding,when excitation is applied to one of the primary windings,expressed in minutes.Electrical Error Angular Range In Minutes
-5.0 to 5.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.8350 inches maximum
Details
None.Shaft Type
round single shaft
Details
Indicates the type of shaft included on the item.Terminal Type And Quantity
8 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 140-018-0001 | 88818 | 5 | - | 3 | 2 | - | KE |
| 140-018-0001 | 1K426 | 5 | - | 5 | 9 | - | KE |
| 140-018-0001 | 99932 | 5 | - | 5 | 9 | - | KE |
| BZC-11-HF-0003/B632 | 99932 | 5 | - | 3 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
NORTHROP GRUMMAN SYSTEMS CORPORATION
CAGE: 95542
BALTIMORE
, MD
, 21240-2001
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-164-5992
What is the NIIN of the NSN 5990-00-164-5992?
The National Item Identification Number (NIIN) of the NSN 5990-00-164-5992 is 00-164-5992
When the NSN 5990-00-164-5992 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, Nov 12, 1971
Does the NSN 5990-00-164-5992 contain any precious metals?
Does not contain precious metal
Does the NSN 5990-00-164-5992 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products