Transmitter Synchro
VTX31-6B1
(NSN) National Stock Number
5990-00-269-0499
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round d body style, 2.7000 inches nominal shoulder diameter, 2.7500 inches nominal second shoulder diameter, 0.3750 inches nominal second shoulder length, 5.1000 inches nominal overall length, 3.1000 inches nominal flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 3 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HH |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round d
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
2.7000 inches nominal
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Second Shoulder Diameter
2.7500 inches nominal
Details
None.Second Shoulder Length
0.3750 inches nominal
Details
None.Overall Length
5.1000 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
3.1000 inches nominal
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.2500 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Body Diameter
2.7000 inches nominal
Details
The length of a straight line which passes through the center of the body,and terminates at the circumference.Shaft Diameter
0.2400 inches nominal single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.7000 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
31
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
115.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
60.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
462.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
6.6 watts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zrs Impedance Magnitude In Ohms
44.00 nominal
Details
The magnitude part /z/ of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Zrs Impedance Angle In Deg
27.00 nominal
Details
The angle part /o/ of the rotor impedance with the stator shorted /zrs/,expressed in degrees.Phase Shift Angle In Deg
6.500 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
0.35 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
0.13
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-10.0 to 10.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Spline Tooth Quantity
22 single shaft
Details
The number of individual teeth on the splined portion of the shaft.Actuator Friction Torque At Plus 25 Deg Celsius
0.50 inch-ounces nominal
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Torque Gradient Per Angular Deg
0.400 inch-ounces nominal
Details
The average torque per angular degree developed between two like items,when one rotor is turned /or displaced/ at 2 degree intervals,between a 10 degree counterclockwise position and 10 degree clockwise position.Shoulder Length
0.6150 inches nominal
Details
None.Aft Of First Flange Diameter
2.7500 inches nominal
Details
None.Spline Tooth Diametral Pitch
96 single shaft
Details
The number of teeth the splined shaft has per inch of pitch diameter.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.3100 inches nominal single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
spline w/threads single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.783 stator to rotor nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Shaft Nominal Thread Size
0.240 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Terminal Type And Quantity
4 screw
Details
Indicates the type and number of terminals for providing electrical connection.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | Q |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| 1 | 590 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-269-0499
What is the NIIN of the NSN 5990-00-269-0499?
The National Item Identification Number (NIIN) of the NSN 5990-00-269-0499 is 00-269-0499
When the NSN 5990-00-269-0499 was assigned to the Federal Catalog?
It was assigned 51 years ago, on Fri, Jul 20, 1973
Does the NSN 5990-00-269-0499 contain any precious metals?
Does not contain precious metal
Does the NSN 5990-00-269-0499 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.