Transmitter Synchro
VCX15-26-6B
(NSN) National Stock Number
5990-00-421-0956
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round c body style, 1.3115 inches minimum and 1.3120 inches maximum shoulder diameter, 0.8745 inches minimum and 0.8750 inches maximum pilot diameter, 3.0380 inches nominal overall length, 1.4340 inches minimum and 1.4370 inches maximum flange diameter, 0.0930 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3115 inches minimum and 1.3120 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8745 inches minimum and 0.8750 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
3.0380 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4340 inches minimum and 1.4370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
1.3120 inches nominal
Details
None.Undercut Width
0.0780 inches maximum
Details
None.Shaft Diameter
0.1870 inches minimum and 0.1872 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5150 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
115.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
60.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
56.1 milliamperes maximum
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
2.4 watts maximum
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Rotor Dc Resistance In Ohms
535.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
540.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
12.700 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
75.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
110.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-7.0 to 7.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Spline Tooth Quantity
21 single shaft
Details
The number of individual teeth on the splined portion of the shaft.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Pilot Length
0.0780 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1320 inches nominal
Details
None.Mounting Surface To Terminal End Distance
2.5230 inches nominal
Details
None.Spline Tooth Diametral Pitch
12 single shaft
Details
The number of teeth the splined shaft has per inch of pitch diameter.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Body Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.1330 inches nominal single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
spline w/threads single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1250 inches nominal
Details
None.Transformation Ratio
0.783 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Shaft Nominal Thread Size
0.190 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Terminal Type And Quantity
5 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 23-807115-1 | 07397 | 1 | - | 5 | 9 | - | TX |
| 15M1H1 | 0BKV4 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
GENERAL DYNAMICS MOTION CONTROL LLC
CAGE: 10112
SAN DIEGO
, CA
, 92154-8217
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-421-0956
What is the NIIN of the NSN 5990-00-421-0956?
The National Item Identification Number (NIIN) of the NSN 5990-00-421-0956 is 00-421-0956
When the NSN 5990-00-421-0956 was assigned to the Federal Catalog?
It was assigned 55 years ago, on Wed, Mar 12, 1969
Does the NSN 5990-00-421-0956 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-421-0956 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products