Transmitter Synchro

11CX1346-4

(NSN) National Stock Number

5990-00-477-1362

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

02073

Schedule B Code

9014900000

Summary

Standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.2930 inches nominal overall length, 1.0575 inches minimum and 1.0620 inches maximum flange diameter, 0.0930 inches nominal flange thickness

DAC	HCC	DMIL	RNCC
5	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AF	-	TX

Identification

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

INC	FIIG	Concept	Condition
02073	A07800	1	1

Specifications

Body Style

standard round c

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Shoulder Diameter

0.9995 inches minimum and 1.0000 inches maximum

Details

The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.

Pilot Diameter

0.6245 inches minimum and 0.6250 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

2.2930 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

1.0575 inches minimum and 1.0620 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0930 inches nominal

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Diameter

0.9750 inches nominal

Details

None.

Undercut Width

0.0620 inches nominal

Details

None.

Shaft Diameter

0.1198 inches minimum and 0.1200 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.4990 inches nominal single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

Fragility Factor

moderately rugged

Details

The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.

Maximum Temp Rise

20.0 deg celsius

Details

The maximum permissible temperature increase in the item as a result of its operation under normal conditions.

Body Size

Details

An alpha and/or numeric designation indicating the size by which the body is identified.

Rotor Input Voltage Rating In Volts

115.0 nominal

Details

The value of the primary excitation voltage for which the rotor is rated,expressed in volts.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Rotor Input Current Rating

31.0 milliamperes maximum

Details

The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.

Rotor Input Electrical Power Rating

490.0 milliwatts nominal

Details

The value of the primary /electrical/ excitation power for which the rotor is rated.

Zro Impedance Magnitude In Ohms

3720.00 minimum and 4700.00 maximum

Details

The magnitude part /z/ of the rotor impedance with the stator open /zro/,expressed in ohms.

Zro Impedance Angle In Deg

80.00 minimum and 84.00 maximum

Details

The angle part /o/ of the rotor impedance with the stator open /zro/,expressed in degrees.

Zss Impedance Magnitude In Ohms

410.00 minimum and 500.00 maximum

Details

The magnitude part /z/ of the stator impedance with the rotor shorted /zss/,expressed in ohms.

Zss Impedance Angle In Deg

17.00 minimum and 26.00 maximum

Details

The angle part /o/ of the stator impedance with the rotor shorted /zss/,expressed in degrees.

Phase Shift Angle In Deg

4.500 input to output nominal

Details

The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.

Maximum Fundamental Null Voltage In Millivolts Per Volt

45.00 output

Details

The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Maximum Total Null Voltage Output In Millivolts Per Volt

75.00

Details

The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Electrical Error Angular Range In Minutes

-7.0 to 7.0

Details

The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.

Actuator Friction Torque At Plus 25 Deg Celsius

0.07 inch-ounces maximum

Details

The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.

Alignment Hole Quantity

Details

The number of holes provided for aligning the item.

Pilot Length

0.0620 inches nominal

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Shoulder Length

0.0620 inches nominal

Details

None.

Mounting Surface To Terminal End Distance

1.7940 inches nominal

Details

None.

Body Material

steel corrosion resisting

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Shaft Slot Depth

0.0250 inches nominal single shaft

Details

None.

Shaft Slot Width

0.0200 inches nominal single shaft

Details

None.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Alignment Hole Depth

0.1250 inches minimum

Details

None.

Transformation Ratio

0.783 stator to rotor nominal

Details

The ratio of the output voltage to the input voltage at maximum coupling.

Alignment Hole Bolt Circle Diameter

0.8120 inches nominal

Details

None.

Test Data Document

81349-mils-20708 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Terminal Type And Quantity

5 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Specification/Standard Data

81349-mil-s-20708/2 government specification

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CR40913002	05088	5	-	C	1	-	ZZ
M20708/2-04E	0U583	E	-	3	2	-	ZZ
SAE-AS20708/2	0U583	E	-	3	1	-	ZZ
AS20708/2	0VH01	E	-	5	1	-	ZZ
11CX4E	81349	E	-	5	1	-	TX
M20708/2-04E	81349	E	-	5	9	-	TX
MIL-S-20708/2	81349	E	-	5	9	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35080	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.

CAGE: 14404

NEW ULM , MN , 56073-1167

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5990-00-477-1362

What is the NIIN of the NSN 5990-00-477-1362?

The National Item Identification Number (NIIN) of the NSN 5990-00-477-1362 is 00-477-1362

When the NSN 5990-00-477-1362 was assigned to the Federal Catalog?

It was assigned 53 years ago, on Fri, Jun 18, 1971

Does the NSN 5990-00-477-1362 contain any precious metals?

Type/content is unknown

Does the NSN 5990-00-477-1362 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.