Electrical Resolver
15RC1275
(NSN) National Stock Number
5990-00-655-2705
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, stainless body material, standard round c body style, 1.3115 inches minimum and 1.3120 inches maximum shoulder diameter, 0.8745 inches minimum and 0.8750 inches maximum pilot diameter, 2.6320 inches minimum and 2.6380 inches maximum overall length, 1.4360 inches minimum and 1.4370 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 6 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
1.3115 inches minimum and 1.3120 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.8745 inches minimum and 0.8750 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.6320 inches minimum and 2.6380 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.4360 inches minimum and 1.4370 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0900 inches minimum and 0.0960 inches maximum
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
1.3090 inches minimum and 1.3150 inches maximum
Details
None.Undercut Width
0.0730 inches minimum and 0.0830 inches maximum
Details
None.Shaft Diameter
0.1870 inches minimum single shaft and 0.1873 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5680 inches minimum single shaft and 0.5740 inches maximum single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
15
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
23.0 maximum
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Frequency In Hertz
1000.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Compensation Method
winding compensated
Details
The means utilized to vary the level of signal input or response to attain the desired operational action.Maximum Fundamental Null Voltage In Millivolts Per Volt
20.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Total Null Voltage Output In Millivolts Per Volt
300.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Alignment Hole Quantity
4
Details
The number of holes provided for aligning the item.Pilot Length
0.0370 inches minimum and 0.0430 inches maximum
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.1299 inches minimum and 0.1350 inches maximum
Details
None.Mounting Surface To Terminal End Distance
1.9540 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Slot Depth
0.0300 inches nominal single shaft
Details
None.Shaft Slot Width
0.0300 inches nominal single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Alignment Hole Depth
0.1250 inches nominal
Details
None.Transformation Ratio
1.000 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Alignment Hole Bolt Circle Diameter
1.0970 inches minimum and 1.1030 inches maximum
Details
None.Terminal Type And Quantity
12 screw
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 9072496 | 18876 | 1 | - | 3 | 2 | - | TX |
| 161197 | 09017 | 5 | - | 5 | 2 | - | TX |
| R151HAM0D103 | 09017 | 5 | - | 5 | 1 | - | TX |
| 9072496 | 55097 | 5 | - | 5 | 2 | - | ZZ |
| U-219271 | 82686 | 5 | - | 5 | 2 | - | ZZ |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
AMETEK TECHNICAL & INDUSTRIAL PRODUCTS, INC. DBA TACHTRONIC INSTRUMENTS DIVISION DIV AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS, INC.
CAGE: 14404
NEW ULM
, MN
, 56073-1167
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-655-2705
What is the NIIN of the NSN 5990-00-655-2705?
The National Item Identification Number (NIIN) of the NSN 5990-00-655-2705 is 00-655-2705
When the NSN 5990-00-655-2705 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-655-2705 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-655-2705 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products