Transmitter Synchro
R913-002
(NSN) National Stock Number
5990-00-679-6157
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.2650 inches nominal overall length, 1.0570 inches minimum and 1.0650 inches maximum flange diameter, 0.0930 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 5 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | ZZ |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.2650 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0570 inches minimum and 1.0650 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9750 inches nominal
Details
None.Undercut Width
0.0500 inches nominal
Details
None.Shaft Diameter
0.1870 inches minimum and 0.1872 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.5000 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
115.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
35.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
610.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Spline Tooth Quantity
21 single shaft
Details
The number of individual teeth on the splined portion of the shaft.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.7650 inches nominal
Details
None.Spline Tooth Diametral Pitch
120 single shaft
Details
The number of teeth the splined shaft has per inch of pitch diameter.Shaft Thread Series Designator
unf single shaft
Details
A designation distinguishing one group of shaft thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.Shaft Thread Direction
right-hand single shaft
Details
The direction of the shaft thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.Shaft Thread Class
2a single shaft
Details
A numeric-alpha designator indicating the ptich diameter tolerance,and an external or internal shaft thread.Body Material
aluminum
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Shaft Thread Length
0.2000 inches nominal single shaft
Details
A measurement of the extent of the shaft threads measured on a line parallel to the longitudinal axis.Shaft Type
spline w/threads single shaft
Details
Indicates the type of shaft included on the item.Transformation Ratio
0.783 rotor to stator nominal
Details
The ratio of the output voltage to the input voltage at maximum coupling.Shaft Nominal Thread Size
0.190 inches single shaft
Details
The length of a straight line passing through the center of the shaft threaded portion,with terminated points at the circumference.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| ZB3-A | 51761 | 6 | - | 5 | 2 | - | TX |
| R913-002 | 88818 | 1 | - | 5 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
KEARFOTT CORP DIV A SUBSIDIARY OF ASTRONAUTICS CORPORATION OF AMERICA
CAGE: 05088
BLACK MOUNTAIN
, NC
, 28711-9111
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-679-6157
What is the NIIN of the NSN 5990-00-679-6157?
The National Item Identification Number (NIIN) of the NSN 5990-00-679-6157 is 00-679-6157
When the NSN 5990-00-679-6157 was assigned to the Federal Catalog?
It was assigned 62 years ago, on Tue, Jan 1, 1963
Does the NSN 5990-00-679-6157 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-679-6157 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products