Linear Electrical Resolver
TLH11E3B321
(NSN) National Stock Number
5990-00-689-4819
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
31780
Schedule B Code
9018903000
Summary
Steel, corrosion resisting body material, standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 1.9750 inches nominal overall length, 1.0610 inches minimum and 1.0620 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | TX |
Identification
An item consisting of a stator and rotor inductively coupled which provides accurate linear indication of shaft rotation about a reference position in the form of a polarized voltage whose magnitude is proportional to angular displacement and phase relationship indicates direction of shaft rotation. Its windings and slots are not uniformly distributed, but instead are deliberately modified to produce a linear output which is usually limited to less than plus or minus 90 degrees of effective electrical travel. Normally it has only one energization winding and one output winding. See also resolver, electrical.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 31780 | A07800 | - | 1 |
Specifications
Body Material
steel, corrosion resisting
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.9750 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0610 inches minimum and 1.0620 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9750 inches nominal
Details
None.Undercut Width
0.0500 inches nominal
Details
None.Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3750 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
115.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
7.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
101.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
2060.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
68.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Rotor Dc Resistance In Ohms
820.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
62.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
2.100 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
5.00 output
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Maximum Linear Range In Deg
-50.0 to 50.0
Details
The rated excursion of angular measurement of that part of total rotational travel in which the output characteristic changes at a rate in direct proportion to the angular primary to secondary orientation changes,expressed in degrees.Linearity In Percent
0.50
Details
The variance,in the specified output characteristics from the theoretically percise values,throughout the linear operational range,expressed as a percentage of deviation from the straight line rate of change.Output Voltage Change Per Deg In Volts
0.3
Details
The change in output voltage for a degree of angular displacement in the linear range /also referred to as sensitivity/,expressed in volts.Actuator Friction Torque At Minus 55 Deg Celsius
9.0 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.6000 inches maximum
Details
None.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
16300.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0220 inches minimum single shaft and 0.0320 inches maximum single shaft
Details
None.Plus J Zso Reactance In Ohms
127.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0220 inches minimum single shaft and 0.0320 inches maximum single shaft
Details
None.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Terminal Type And Quantity
4 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 65902-01398 | 78286 | 1 | - | 5 | 2 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34760 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-689-4819
What is the NIIN of the NSN 5990-00-689-4819?
The National Item Identification Number (NIIN) of the NSN 5990-00-689-4819 is 00-689-4819
When the NSN 5990-00-689-4819 was assigned to the Federal Catalog?
It was assigned 53 years ago, on Fri, Feb 19, 1971
Does the NSN 5990-00-689-4819 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-689-4819 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products