Transmitter Synchro
8595314-001
(NSN) National Stock Number
5990-00-819-2272
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
02073
Schedule B Code
9014900000
Summary
Standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.9950 inches nominal overall length, 1.0590 inches minimum and 1.0620 inches maximum flange diameter, 0.0820 inches nominal flange thickness
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| X | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | XX |
Identification
A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 02073 | A07800 | 1 | 1 |
Specifications
Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.4995 inches minimum and 0.5000 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
1.9950 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0590 inches minimum and 1.0620 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0820 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9620 inches minimum and 0.9670 inches maximum
Details
None.Undercut Width
0.0620 inches nominal
Details
None.Shaft Diameter
0.1198 inches minimum and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3750 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
250.0 milliamperes maximum
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
1.4 watts maximum
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
14.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
4.40 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
22.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Rotor Dc Resistance In Ohms
8.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
4.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Maximum Total Null Voltage Output In Millivolts Per Volt
26.00
Details
The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Electrical Error Angular Range In Minutes
-10.0 to 10.0
Details
The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
9.0 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
3.0 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Torque Gradient Per Angular Deg
4200.0 millimeter-milligrams nominal
Details
The average torque per angular degree developed between two like items,when one rotor is turned /or displaced/ at 2 degree intervals,between a 10 degree counterclockwise position and 10 degree clockwise position.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.6200 inches nominal
Details
None.Body Material
steel corrosion resisting
Details
The chemical compound or mechanical mixture properties of which the body is fabricated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
122.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0310 inches nominal single shaft
Details
None.Plus J Zso Reactance In Ohms
21.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0270 inches nominal single shaft
Details
None.Plus J Zrs Reactance In Ohms
12.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Terminal Type And Quantity
5 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| AY110AC40A1 | 96774 | 5 | - | C | 1 | - | ZZ |
| 11CX1682 | 14404 | 5 | - | 5 | 2 | - | TX |
| 8595314-001 | 14404 | 5 | - | 5 | 9 | - | TX |
| AY110AC40A1 | 55972 | X | - | 5 | 9 | - | XX |
| 7901464-001 | 99974 | 1 | - | 5 | 9 | - | TX |
| 8595314-001 | 99974 | 1 | - | 3 | 9 | - | TX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 35080 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
FAQs
Frequently asked questions for NSN 5990-00-819-2272
What is the NIIN of the NSN 5990-00-819-2272?
The National Item Identification Number (NIIN) of the NSN 5990-00-819-2272 is 00-819-2272
When the NSN 5990-00-819-2272 was assigned to the Federal Catalog?
It was assigned 63 years ago, on Mon, Jan 1, 1962
Does the NSN 5990-00-819-2272 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-819-2272 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products