Electrical Resolver
10123-1REVA
(NSN) National Stock Number
5990-00-838-0696
Federal Supply Classification
5990 Synchros and Resolvers
Item Name Code
22966
Schedule B Code
9018903000
Summary
Steel, stainless body material, standard round c body style, 0.9995 inches minimum and 1.0000 inches maximum shoulder diameter, 0.6245 inches minimum and 0.6250 inches maximum pilot diameter, 2.0840 inches nominal overall length, 1.0570 inches minimum and 1.0650 inches maximum flange diameter
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | HH |
Identification
An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 22966 | A07800 | - | 1 |
Specifications
Body Material
steel, stainless
Details
The basic material of which the body is fabricated. please use mrc matt withisac coding for body in place of this discontinued mrc.Body Style
standard round c
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.Shoulder Diameter
0.9995 inches minimum and 1.0000 inches maximum
Details
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.Pilot Diameter
0.6245 inches minimum and 0.6250 inches maximum
Details
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.Overall Length
2.0840 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Flange Diameter
1.0570 inches minimum and 1.0650 inches maximum
Details
The length of a straight line which passes through the center of a flange,and terminates at the circumference.Flange Thickness
0.0930 inches nominal
Details
A measurement of the smallest dimension of a flange,in distinction from length or width.Undercut Diameter
0.9750 inches nominal
Details
None.Undercut Width
0.0500 inches nominal
Details
None.Shaft Diameter
0.1195 inches minimum single shaft and 0.1200 inches maximum single shaft
Details
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.Shaft Length
0.3780 inches nominal single shaft
Details
A measurement of the longest dimension of the shaft,in distinction from width.Schematic Diagram Designator
1 rotor, 2 stator
Details
A designator indicating a graphic representation,in standard and accepted symbols,of essential electrical-electronic elements and related connections on the item.Fragility Factor
moderately rugged
Details
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.Body Size
11
Details
An alpha and/or numeric designation indicating the size by which the body is identified.Stator Input Voltage Rating In Volts
22.0 nominal
Details
The value of the primary excitation voltage for which the stator is rated,expressed in volts.Stator Input Current Rating
17.8 milliamperes nominal
Details
The value of the primary excitation current for which the stator is rated,with rotor /secondary/ circuit open.Stator Input Electrical Power Rating
88.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the stator is rated.Rotor Input Voltage Rating In Volts
26.0 nominal
Details
The value of the primary excitation voltage for which the rotor is rated,expressed in volts.Frequency In Hertz
400.0 nominal
Details
The cycles per second /hertz/ of the alternating current.Rotor Input Current Rating
17.0 milliamperes nominal
Details
The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.Rotor Input Electrical Power Rating
90.0 milliwatts nominal
Details
The value of the primary /electrical/ excitation power for which the rotor is rated.Zro Resistance In Ohms
310.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator open /zro/,expressed in ohms.Zso Resistance In Ohms
280.00 nominal
Details
The resistance /r/ part of the stator impedance with the rotor open /zso/,expressed in ohms.Zrs Resistance In Ohms
53.00 nominal
Details
The resistance /r/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Rotor Dc Resistance In Ohms
190.00 nominal
Details
The opposition that the rotor offers to the flow of the direct current,expressed in ohms.Stator Dc Resistance In Ohms
170.00 nominal
Details
The opposition that the stator offers to the flow of direct current,expressed in ohms.Phase Shift Angle In Deg
7.000 input to output nominal
Details
The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.Maximum Fundamental Null Voltage In Millivolts Per Volt
26.00 input
Details
The maximum voltage,without harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.Interaxis Error Angular Range In Minutes
-7.0 to 7.0
Details
The deviation from 90 degrees perpendicularity of the secondary winding,when excitation is applied to one of the primary windings,expressed in minutes.Actuator Friction Torque At Minus 55 Deg Celsius
16.00 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at minus 55 degrees celsius.Actuator Friction Torque At Plus 25 Deg Celsius
4.00 centimeter-grams maximum
Details
The amount of rotary force that must be applied to the actuator to cause rotation,at plus 25 degrees celsius.Shaft Maximum Radial Play
0.0008 inches
Details
The maximum shaft displacement perpendicular to the shaft axis due to reversal of a specified force applied perpendicular to the shaft axis,and measured at a specified distance from the front surface of the unit.Shaft End Play
0.0005 inches minimum and 0.0015 inches maximum
Details
The axial shaft displacement due to reversal of a specified axial force,measured at the end of the shaft.Terminal Designator And Schematic Position
connection r1 position a and connection r2 position b and connection r3 position c and connection s1 position h and connection s2 position f and connection s3 position j and connection s3 position e
Details
A designation identifying the electrical connection facility provided for each termination of the item,and its location on the schematic diagram.Pilot Length
0.0620 inches nominal
Details
A measurement of the longest dimension of a pilot,in distinction from width.Shoulder Length
0.0620 inches nominal
Details
None.Mounting Surface To Terminal End Distance
1.6440 inches maximum
Details
None.Shaft Maximum Runout
0.0010 inches
Details
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated.Terminal Location
rear
Details
Indicates the location of the terminal/s/ on the item.Plus J Zro Reactance In Ohms
1500.00 nominal
Details
The reactance (x) part of the rotor impedance with the stator open (zro).Shaft Slot Depth
0.0220 inches minimum single shaft and 0.0370 inches maximum single shaft
Details
None.Plus J Zso Reactance In Ohms
1200.00 nominal
Details
The reactance (x) part of the stator impedance with the rotor open (zso),expressed in ohms.Shaft Slot Width
0.0220 inches minimum single shaft and 0.0320 inches maximum single shaft
Details
None.Plus J Zrs Reactance In Ohms
23.00 nominal
Details
The reactance /x/ part of the rotor impedance with the stator shorted /zrs/,expressed in ohms.Shaft Type
round, slotted single shaft
Details
Indicates the type of shaft included on the item.Shaft Radial Play Determining Weight
4.0 ounces
Details
The force (load) applied perpendicular to the shaft axis to determine radial play.Shaft End Play Determining Weight
8.0 ounces
Details
The force (load) applied parallel to the shaft axis to determine end play.Terminal Type And Quantity
7 wire lead
Details
Indicates the type and number of terminals for providing electrical connection.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| CR40939007 | 05088 | A | - | 5 | 2 | - | TX |
| CR40931018 | 88818 | 5 | - | 5 | 9 | - | TX |
| TSH11G08A050 | 99932 | 6 | - | 5 | 2 | - | ZZ |
| 10123-1 | 10138 | X | - | 3 | 2 | - | XX |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 34580 | - | W | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 72D | Z | 9 |
What's Included?
- Certificate of Conformity
- QC Inspection prior to shipping
- On time delivery
- Friendly service to back every order
Manufacturer
ASTRONAUTICS CORPORATION OF AMERICA
CAGE: 10138
OAK CREEK
, WI
, 53154-2901
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5990-00-838-0696
What is the NIIN of the NSN 5990-00-838-0696?
The National Item Identification Number (NIIN) of the NSN 5990-00-838-0696 is 00-838-0696
When the NSN 5990-00-838-0696 was assigned to the Federal Catalog?
It was assigned 58 years ago, on Fri, Dec 9, 1966
Does the NSN 5990-00-838-0696 contain any precious metals?
Type/content is unknown
Does the NSN 5990-00-838-0696 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products