Transmitter Synchro

417503-4

(NSN) National Stock Number

5990-00-893-8998

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

02073

Schedule B Code

9014900000

Summary

Standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.5210 inches nominal overall length, 0.7450 inches minimum and 0.7530 inches maximum flange diameter, 0.0620 inches nominal flange thickness, 0.6870 inches nominal undercut diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
1	-	-	TX

Identification

A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.

INC	FIIG	Concept	Condition
02073	A07800	1	1

Specifications

Body Style

standard round a

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Pilot Diameter

0.4995 inches minimum and 0.5000 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

1.5210 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

0.7450 inches minimum and 0.7530 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0620 inches nominal

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Diameter

0.6870 inches nominal

Details

None.

Undercut Width

0.0620 inches nominal

Details

None.

Shaft Diameter

0.1195 inches minimum and 0.1200 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.2810 inches nominal single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

End Item Identification

aircraft, t-38

Details

The national stock number or the identification information of the end equipment for which the item is a part.

Body Size

Details

An alpha and/or numeric designation indicating the size by which the body is identified.

Rotor Input Voltage Rating In Volts

26.0 nominal

Details

The value of the primary excitation voltage for which the rotor is rated,expressed in volts.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Rotor Input Current Rating

114.0 milliamperes nominal

Details

The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.

Rotor Input Electrical Power Rating

650.0 milliwatts nominal

Details

The value of the primary /electrical/ excitation power for which the rotor is rated.

Electrical Error Angular Range In Minutes

-10.0 to 10.0

Details

The limits of permissible deviation in angular arc error from electrical zero,expressed in minutes.

Pilot Length

0.0400 inches nominal

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Mounting Surface To Terminal End Distance

1.2400 inches nominal

Details

None.

Body Material

steel corrosion resisting

Details

The chemical compound or mechanical mixture properties of which the body is fabricated.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Shaft Slot Depth

0.0300 inches nominal single shaft

Details

None.

Shaft Slot Width

0.0250 inches nominal single shaft

Details

None.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Criticality Code Justification

feat

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Transformation Ratio

0.454 rotor to stator nominal

Details

The ratio of the output voltage to the input voltage at maximum coupling.

Special Features

weapon system essential

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Terminal Type And Quantity

5 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
CM41014-062	05088	5	-	5	2	-	ZZ
CM41014-062	88818	5	-	5	9	-	TX
417503-4	89305	5	-	3	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
35080	-	W	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

KEARFOTT CORPORATION DIV GUIDANCE AND NAVIGATION DIVISION

CAGE: 88818

PINE BROOK , NJ , 07058-9385

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5990-00-893-8998

What is the NIIN of the NSN 5990-00-893-8998?

The National Item Identification Number (NIIN) of the NSN 5990-00-893-8998 is 00-893-8998

When the NSN 5990-00-893-8998 was assigned to the Federal Catalog?

It was assigned 63 years ago, on Mon, Jan 1, 1962

Does the NSN 5990-00-893-8998 contain any precious metals?

Type/content is unknown

Does the NSN 5990-00-893-8998 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.