Electrical Resolver

8311-7301-002

(NSN) National Stock Number

5990-01-082-3385

Federal Supply Classification

5990 Synchros and Resolvers

Item Name Code

22966

Schedule B Code

9018903000

Summary

Standard round a body style, 0.4995 inches minimum and 0.5000 inches maximum pilot diameter, 1.7250 inches minimum and 1.7450 inches maximum overall length, 0.7470 inches minimum and 0.7500 inches maximum flange diameter, 0.0590 inches minimum and 0.0650 inches maximum flange thickness, 0.6910 inches maximum undercut diameter

DAC	HCC	DMIL	RNCC
5	-	-	5

RNVC	SADC	MSDS	RNAAC
2	-	-	BF

Identification

An item consisting of a rotor and a stator inductively coupled. It usually has two rotor windings displaced from each other by 90 degrees and two stator windings similarly displaced. The output voltage(s) is a trigonometric function of the input voltage(s) and the angular displacement of the rotor with respect to the stator. See also synchro (as modified) and goniometer, electrical. Excludes:transolver, electrical and potentiometer sine/cosine electrical resolvers.

INC	FIIG	Concept	Condition
22966	A07800	-	1

Specifications

Body Style

standard round a

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the body.

Pilot Diameter

0.4995 inches minimum and 0.5000 inches maximum

Details

The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.

Overall Length

1.7250 inches minimum and 1.7450 inches maximum

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Flange Diameter

0.7470 inches minimum and 0.7500 inches maximum

Details

The length of a straight line which passes through the center of a flange,and terminates at the circumference.

Flange Thickness

0.0590 inches minimum and 0.0650 inches maximum

Details

A measurement of the smallest dimension of a flange,in distinction from length or width.

Undercut Diameter

0.6910 inches maximum

Details

None.

Undercut Width

0.0590 inches minimum and 0.0650 inches maximum

Details

None.

Shaft Diameter

0.0895 inches minimum and 0.0900 inches maximum single shaft

Details

The length of a straight line which passes through the center of a shaft,and terminates at the circumference.

Shaft Length

0.3480 inches minimum and 0.4720 inches maximum single shaft

Details

A measurement of the longest dimension of the shaft,in distinction from width.

Rotor Input Voltage Rating In Volts

26.0 nominal

Details

The value of the primary excitation voltage for which the rotor is rated,expressed in volts.

Frequency In Hertz

400.0 nominal

Details

The cycles per second /hertz/ of the alternating current.

Rotor Input Current Rating

45.0 milliamperes nominal

Details

The value of the primary excitation current for which the rotor is rated,with stator /secondary/ circuit open.

Rotor Input Electrical Power Rating

40.0 watts maximum

Details

The value of the primary /electrical/ excitation power for which the rotor is rated.

Transformation Ratio Equality In Percent

0.5 maximum

Details

The variation of the transformation ratio for all possible combinations of stator,rotor,and compensating windings,expressed in percent.

Compensation Method

winding compensated

Details

The means utilized to vary the level of signal input or response to attain the desired operational action.

Phase Shift Angle In Deg

16.000 input to output minimum and 20.000 input to output maximum

Details

The difference between the phase time of two or more voltages or currents of the same frequency,at the same instant of time,expressed in degrees.

Maximum Total Null Voltage Output In Millivolts Per Volt

30.00

Details

The maximum voltage,including harmonics,induced in the secondary circuit at the null angle rotor position,expressed in millivolts per volt.

Pilot Length

0.0370 inches minimum and 0.0430 inches maximum

Details

A measurement of the longest dimension of a pilot,in distinction from width.

Mounting Surface To Terminal End Distance

1.2400 inches maximum

Details

None.

Terminal Location

rear

Details

Indicates the location of the terminal/s/ on the item.

Shaft Slot Depth

0.0200 inches minimum and 0.0350 inches maximum single shaft

Details

None.

Shaft Slot Width

0.0150 inches minimum and 0.0300 inches maximum single shaft

Details

None.

Shaft Type

round, slotted single shaft

Details

Indicates the type of shaft included on the item.

Transformation Ratio

0.440 rotor to stator minimum and 0.468 rotor to stator maximum

Details

The ratio of the output voltage to the input voltage at maximum coupling.

Terminal Type And Quantity

6 wire lead

Details

Indicates the type and number of terminals for providing electrical connection.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
11779073	19200	1	-	7	2	-	BF
U-217248	82686	5	-	5	2	-	BF
8RC-300-E3B	06989	5	-	3	2	-	BF

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
N	A	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34580	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

BAE SYSTEMS (OPERATIONS) LIMITED

CAGE: K0656

ROCHESTER , KENT , ME1 2XX

UNITED KINGDOM

View Products

FAQs

Frequently asked questions for NSN 5990-01-082-3385

What is the NIIN of the NSN 5990-01-082-3385?

The National Item Identification Number (NIIN) of the NSN 5990-01-082-3385 is 01-082-3385

When the NSN 5990-01-082-3385 was assigned to the Federal Catalog?

It was assigned 45 years ago, on Fri, Aug 31, 1979

Does the NSN 5990-01-082-3385 contain any precious metals?

Does not contain precious metal

Does the NSN 5990-01-082-3385 contain any hazardous material?

No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.