Receptacle Dummy Connector

MIL-C-26482

MIL-C-26482
(NSN) National Stock Number
5935-00-880-7001
Federal Supply Classification
5935 Electrical Connectors
Item Name Code
15092
Schedule B Code
8548900100
Summary

0.650 inches nominal overall length, 1.703 inches nominal overall height, 1.703 inches nominal overall width, moisture resistant and salt water resistant and vibration resistant environmental protection, 0.120 inches nominal unthreaded mounting hole diameter, 1.375 inches nominal center to center distance between mounting facilities parallel to height

DAC HCC DMIL RNCC
3 - - 5
RNVC SADC MSDS RNAAC
9 - - TX
Identification

An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.

INC FIIG Concept Condition
15092 A039B0 - 1
Specifications
Overall Length
0.650 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Overall Height
1.703 inches nominal
Details The distance measured in a straight line from the bottom to the top of an item.
Overall Width
1.703 inches nominal
Details An overall measurement taken at right angles to the length of an item,in distinction from thickness.
Environmental Protection
moisture resistant and salt water resistant and vibration resistant
Details The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
Unthreaded Mounting Hole Diameter
0.120 inches nominal
Details The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
Center To Center Distance Between Mounting Facilities Parallel To Height
1.375 inches nominal
Details The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
Distance Between Centerlines Of Mounting Facilities Parallel To Body Width
1.375 inches nominal
Details The distance between centerlines of mounting facilities parallel to the width of the item.
Distance From Mounting Shoulder To Front Face
0.556 inches minimum and 0.587 inches maximum
Details None.
Mating End Quantity
1
Details The number of mating ends provided with the item which are designed to accommodate another connector.
Shell Type
solid
Details Indicates the type of shell included on the item.
Connector Locking Method
bayonet pin
Details The means used to secure a connector to its mating counterpart.
End Item Identification
fms-a7 aircraft; f4s aircraft; aircraft, orion p-3; helicopter, carrier based asw, sh-60f; aircraft, stratofortress b-52; aircrdaft, f-16; guided missile, intercept; aircraft, eagle f-15; aircraft, thunderbolt ii, a-10
Details The national stock number or the identification information of the end equipment for which the item is a part.
Criticality Code Justification
feat
Details The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
Shell Material
aluminum alloy
Details The chemical compound or mechanical mixture properties of which the shell is fabricated.
Shell Surface Treatment
cadmium
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
Shell Surface Treatment Document And Classification
qq-p-416,ty 2,cl 3 fed spec single treatment response
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.
Special Features
weapon system essential
Details Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.
Test Data Document
81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Specification/Standard Data
96906-ms3115 government standard
Details The document designator of the specification or standard which established the item of supply.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
9.51 02 PR 22 C0062 3 - 5 2 - ZG
8500-24 D9422 3 - 5 2 - ZG
10-263999-223 D8311 3 - 5 9 - ZG
KPT15-22A D1371 3 - 5 2 - ZG
VG95328T07C22 A6854 6 - 5 2 - ZZ
MIL-DTL-26482 81349 E - 4 1 - ZZ
MS3115-22A 96906 3 - 2 2 - TX
MS3115-22W 96906 6 - C 1 - ZZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P A A -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
34570 - W -
RVC WCC TCC SHC
- 72D Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CAGE: 81349
View Products
FAQs
Frequently asked questions for NSN 5935-00-880-7001
What is the NIIN of the NSN 5935-00-880-7001?
The National Item Identification Number (NIIN) of the NSN 5935-00-880-7001 is 00-880-7001
When the NSN 5935-00-880-7001 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Fri, Jan 1, 1960
Does the NSN 5935-00-880-7001 contain any precious metals?
Does not contain precious metal
Does the NSN 5935-00-880-7001 contain any hazardous material?
No information in HMIRS
What is the ESD classification of NSN 5935-00-880-7001?
No known electrostatic discharge

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA