Receptacle Dummy Connector

MS3115-22W

(NSN) National Stock Number

5935-00-880-7001

Federal Supply Classification

5935 Electrical Connectors

Item Name Code

15092

Schedule B Code

8548900100

Summary

0.650 inches nominal overall length, 1.703 inches nominal overall height, 1.703 inches nominal overall width, moisture resistant and salt water resistant and vibration resistant environmental protection, 0.120 inches nominal unthreaded mounting hole diameter, 1.375 inches nominal center to center distance between mounting facilities parallel to height

DAC	HCC	DMIL	RNCC
6	-	-	C

RNVC	SADC	MSDS	RNAAC
1	AC	-	ZZ

Identification

An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.

INC	FIIG	Concept	Condition
15092	A039B0	-	1

Specifications

Overall Length

0.650 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Overall Height

1.703 inches nominal

Details

The distance measured in a straight line from the bottom to the top of an item.

Overall Width

1.703 inches nominal

Details

An overall measurement taken at right angles to the length of an item,in distinction from thickness.

Environmental Protection

moisture resistant and salt water resistant and vibration resistant

Details

The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.

Unthreaded Mounting Hole Diameter

0.120 inches nominal

Details

The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.

Center To Center Distance Between Mounting Facilities Parallel To Height

1.375 inches nominal

Details

The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.375 inches nominal

Details

The distance between centerlines of mounting facilities parallel to the width of the item.

Distance From Mounting Shoulder To Front Face

0.556 inches minimum and 0.587 inches maximum

Details

None.

Mating End Quantity

Details

The number of mating ends provided with the item which are designed to accommodate another connector.

Shell Type

solid

Details

Indicates the type of shell included on the item.

Connector Locking Method

bayonet pin

Details

The means used to secure a connector to its mating counterpart.

End Item Identification

fms-a7 aircraft; f4s aircraft; aircraft, orion p-3; helicopter, carrier based asw, sh-60f; aircraft, stratofortress b-52; aircrdaft, f-16; guided missile, intercept; aircraft, eagle f-15; aircraft, thunderbolt ii, a-10

Details

The national stock number or the identification information of the end equipment for which the item is a part.

Criticality Code Justification

feat

Details

The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

Shell Material

aluminum alloy

Details

The chemical compound or mechanical mixture properties of which the shell is fabricated.

Shell Surface Treatment

cadmium

Details

The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.

Shell Surface Treatment Document And Classification

qq-p-416,ty 2,cl 3 fed spec single treatment response

Details

The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.

Special Features

weapon system essential

Details

Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.

Test Data Document

81349-mil-c-26482 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).

Details

The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

Specification/Standard Data

96906-ms3115 government standard

Details

The document designator of the specification or standard which established the item of supply.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
9.51 02 PR 22	C0062	3	-	5	2	-	ZG
8500-24	D9422	3	-	5	2	-	ZG
10-263999-223	D8311	3	-	5	9	-	ZG
KPT15-22A	D1371	3	-	5	2	-	ZG
VG95328T07C22	A6854	6	-	5	2	-	ZZ
MIL-C-26482	81349	3	-	5	9	-	TX
MIL-DTL-26482	81349	E	-	4	1	-	ZZ
MS3115-22A	96906	3	-	2	2	-	TX

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	A	A	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
34570	-	W	-

RVC	WCC	TCC	SHC
-	72D	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

CAGE: 96906

View Products

FAQs

Frequently asked questions for NSN 5935-00-880-7001

What is the NIIN of the NSN 5935-00-880-7001?

The National Item Identification Number (NIIN) of the NSN 5935-00-880-7001 is 00-880-7001

When the NSN 5935-00-880-7001 was assigned to the Federal Catalog?

It was assigned 64 years ago, on Fri, Jan 1, 1960

Does the NSN 5935-00-880-7001 contain any precious metals?

Does not contain precious metal

Does the NSN 5935-00-880-7001 contain any hazardous material?

No information in HMIRS

What is the ESD classification of NSN 5935-00-880-7001?

No known electrostatic discharge

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.