Band Pass Filter

G300264S3

G300264S3
(NSN) National Stock Number
5915-00-146-5358
Federal Supply Classification
5915 Filters and Networks
Item Name Code
00209
Schedule B Code
8527995030
Summary

5.560 inches nominal overall length, 0.750 inches nominal body outside diameter, +10.0 to 55.0 vibration resistance range in hertz, +0.0 to 70.0 deg celsius operating temp range, 281.0 megahertz blank reference frequency per function, 50.0 ohms blank input impedance per function w/load

DAC HCC DMIL RNCC
1 - - 7
RNVC SADC MSDS RNAAC
2 - - HH
Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC FIIG Concept Condition
00209 A047B0 3 1
Specifications
Overall Length
5.560 inches nominal
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Outside Diameter
0.750 inches nominal
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Vibration Resistance Range In Hertz
+10.0 to 55.0
Details The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.
Operating Temp Range
+0.0 to 70.0 deg celsius
Details The minimum and maximum limits of temperature at which the item is rated for operation.
Reference Frequency Per Function
281.0 megahertz blank
Details The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.
Input Impedance Per Function W/Load
50.0 ohms blank
Details The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).
Output Impedance Per Function W/Source Across Input
50.0 ohms blank
Details The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).
Input Terminal Manufacturer Code
11882
Details The identifying numeric code of the originator that controls or manufactures the input terminal.
Input Terminal Identification
32333
Details The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.
Output Terminal Manufacturer Code
11882
Details The identifying numeric code of the originator that controls or manufactures the output terminal.
Output Terminal Identification
32333
Details The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.
Voltage Standing Wave Ratio Per Function
1.5 blank
Details The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.
Inclosure Type
encased
Details Indicates the type of inclosure provided to coat,cover,protect,or encase the item.
Mounting Facility Type And Quantity
1 clamp
Details Indicates the type and number of facilities by which the item is mounted.
Insertion Loss At Reference Frequency Per Function In Decibels
0.9 blank
Details The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.
Functional Terminal Type And Quantity
1 connector, receptacle input 1st function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Functional Terminal Type And Quantity
1 connector, receptacle output 2nd function
Details Indicates the functional type and number of terminals providing electrical connection to the item.
Specified Frequencies Of Discrimination Per Function
225.00 megahertz blank and 269.00 megahertz blank and 293.00 megahertz blank and 325.00 megahertz blank
Details The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.
Frequency Band Width Per Function
269.00 megahertz blank and 293.00 megahertz blank
Details The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.
Discrimination At Specified Frequencies Per Function In Decibels
40.0 minimum blank and 3.0 nominal blank 1st function
Details The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.
Voltage Standing Wave Ratio Frequency Limits Per Function
271.5 megahertz blank and 290.5 megahertz blank
Details The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.
Style Designator
round terminal/terminals on opposite surfaces
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
14270 04423 5 - 5 2 - HH
TBA280-24-4AA1 04423 6 - 3 2 - HH
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
P U - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
58500 - P -
RVC WCC TCC SHC
- 593 Z 9

What's Included?

  • Certificate of Conformity
  • QC Inspection prior to shipping
  • On time delivery
  • Friendly service to back every order
Manufacturer
L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS
CAGE: 24930
VAN NUYS , CA , 91406-2027
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 5915-00-146-5358
What is the NIIN of the NSN 5915-00-146-5358?
The National Item Identification Number (NIIN) of the NSN 5915-00-146-5358 is 00-146-5358
When the NSN 5915-00-146-5358 was assigned to the Federal Catalog?
It was assigned 52 years ago, on Mon, Aug 14, 1972
Does the NSN 5915-00-146-5358 contain any precious metals?
Type/content is unknown
Does the NSN 5915-00-146-5358 contain any hazardous material?
No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

At Aerospace Shop, we are dedicated to providing high-quality aerospace components, shop supplies, replacement parts, and tools.

With a commitment to excellence and customer satisfaction, we aim to be your trusted partner in the aerospace industry.

Contact
800 Town and Country Blvd
Houston, TX, 77024
United States
© 2024 Aerospace Shop, Inc. All rights reserved.
Made in USA