Band Pass Filter

TBA280-24-4AA1

(NSN) National Stock Number

5915-00-146-5358

Federal Supply Classification

5915 Filters and Networks

Item Name Code

00209

Schedule B Code

8527995030

Summary

5.560 inches nominal overall length, 0.750 inches nominal body outside diameter, +10.0 to 55.0 vibration resistance range in hertz, +0.0 to 70.0 deg celsius operating temp range, 281.0 megahertz blank reference frequency per function, 50.0 ohms blank input impedance per function w/load

DAC	HCC	DMIL	RNCC
6	-	-	3

RNVC	SADC	MSDS	RNAAC
2	-	-	HH

Identification

An item designed to pass frequencies within a specified range (band) and to suppress frequencies outside the range (band). Excludes:a single inductance, or a single capacitance, or a single resistance. See coil (as modified); reactor; capacitor (as modified); and resistor (as modified).

INC	FIIG	Concept	Condition
00209	A047B0	3	1

Specifications

Overall Length

5.560 inches nominal

Details

The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

Body Outside Diameter

0.750 inches nominal

Details

The length of a straight line which passes through the center of the body,and terminates at the outside circumference.

Vibration Resistance Range In Hertz

+10.0 to 55.0

Details

The low and high frequencies of vibratory motion and mechanical stresses between which the item is tested,or operated,without deleterious effect on its electrical or mechanical characteristics,expressed in hertz.

Operating Temp Range

+0.0 to 70.0 deg celsius

Details

The minimum and maximum limits of temperature at which the item is rated for operation.

Reference Frequency Per Function

281.0 megahertz blank

Details

The frequency at which the insertion loss is measured per function,and to which all related attenuation loss measurements are referred.

Input Impedance Per Function W/Load

50.0 ohms blank

Details

The total opposition per function with load (resistive and reactive) presented by the device to the source (asa c42.65,paragraph 65.08.399).

Output Impedance Per Function W/Source Across Input

50.0 ohms blank

Details

The total opposition per function with source across input (resistive and reactive) presented by the device to the load (asa c42.65,paragraph 65.08.402).

Input Terminal Manufacturer Code

11882

Details

The identifying numeric code of the originator that controls or manufactures the input terminal.

Input Terminal Identification

32333

Details

The specification,standard,or manufacturers identification number or symbol used to identify the input terminal.

Output Terminal Manufacturer Code

11882

Details

The identifying numeric code of the originator that controls or manufactures the output terminal.

Output Terminal Identification

32333

Details

The specification,standard,or manufacturers identification number or symbol used to identify the output terminal.

Voltage Standing Wave Ratio Per Function

1.5 blank

Details

The ratio of the maximum to the minimum voltage of the standing wave per function. the larger relative portion is given,the lower value having an implied /not given/ value of one /unity/.

Inclosure Type

encased

Details

Indicates the type of inclosure provided to coat,cover,protect,or encase the item.

Mounting Facility Type And Quantity

1 clamp

Details

Indicates the type and number of facilities by which the item is mounted.

Insertion Loss At Reference Frequency Per Function In Decibels

0.9 blank

Details

The ratio per function of the power delivered to the load before insertion of the filter to the power delivered to the load after insertion of the filter,expressed in decibels.

Functional Terminal Type And Quantity

1 connector, receptacle input 1st function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Functional Terminal Type And Quantity

1 connector, receptacle output 2nd function

Details

Indicates the functional type and number of terminals providing electrical connection to the item.

Specified Frequencies Of Discrimination Per Function

225.00 megahertz blank and 269.00 megahertz blank and 293.00 megahertz blank and 325.00 megahertz blank

Details

The specified frequencies,per function,at which losses in signal strength are,by design or measurement,established in a filter circuit.

Frequency Band Width Per Function

269.00 megahertz blank and 293.00 megahertz blank

Details

The difference,per function,between the limiting frequencies within which performance,in respect to some characteristic,falls within specified limits.

Discrimination At Specified Frequencies Per Function In Decibels

40.0 minimum blank and 3.0 nominal blank 1st function

Details

The algebraic difference between the insertion loss at a specified frequency and the insertion loss at the reference frequency per function,expressed in decibels.

Voltage Standing Wave Ratio Frequency Limits Per Function

271.5 megahertz blank and 290.5 megahertz blank

Details

The minimum and maximum values of frequency,per function,between which the voltage standing wave ratio is specified.

Style Designator

round terminal/terminals on opposite surfaces

Details

The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

Master-Cross Reference List

Part	CAGE	DAC	HCC	RNCC	RNVC	MSDS	RNAAC
G300264S3	24930	1	-	7	2	-	HH
14270	04423	5	-	5	2	-	HH

Material and Special Handling

Hazardous material, precious metals, criticality, and electrostatic discharge indicators.

HMIC	PMIC	ESD/EMI	Criticality
P	U	-	-

Freight

Universal / National Freight and Handling Information

UFC	HMC	LTL	LCL
58500	-	P	-

RVC	WCC	TCC	SHC
-	593	Z	9

What's Included?

Certificate of Conformity
QC Inspection prior to shipping
On time delivery
Friendly service to back every order

Manufacturer

TELONIC BERKELEY, INC. DBA TELONIC BERKELEY

CAGE: 04423

VISTA , CA , 92081-7874

UNITED STATES

View Products

FAQs

Frequently asked questions for NSN 5915-00-146-5358

What is the NIIN of the NSN 5915-00-146-5358?

The National Item Identification Number (NIIN) of the NSN 5915-00-146-5358 is 00-146-5358

When the NSN 5915-00-146-5358 was assigned to the Federal Catalog?

It was assigned 52 years ago, on Mon, Aug 14, 1972

Does the NSN 5915-00-146-5358 contain any precious metals?

Type/content is unknown

Does the NSN 5915-00-146-5358 contain any hazardous material?

No information in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.